REMOVAL & INSTALLATION
| CAUTION | When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION Section before disconnecting battery. |
Using a trim stick, remove power mirror switch from mounting position. Disconnect wire connector. To install, reverse removal procedure.
- Remove front door trim panel. Remove window frame trim. Disconnect power mirror motor wire connector. remove nuts holding mirror to door.
- Separate mirror from door. disengage wire harness plug from door. Feed wire harness through door to outside of vehicle. To install, reverse removal procedure. Verify mirror operation.
