Home ReviewsRefund
Home/Dodge/Stratus/Dodge Stratus I (1995-2000)/Repair manual/Door Locks & Anti-Theft Systems/Keyless Entry System - Remote: Removal & Installation
Contents Wiring diagrams Section: Door Locks & Anti-Theft Systems All sections

Keyless Entry System - Remote: Removal & Installation Dodge Stratus I

Door Locks & Anti-Theft Systems 1 illustration ~102 words

Removal & Installation

  1. Open driver's door and remove end cap from dashboard. Remove scuff plate and center bezel. Remove instrument cluster hood. Remove left side knee bolster. Remove steering column cover. Remove silencer. Remove wiring harness connectors from junction block.
  2. Remove junction block/BCM assembly by pulling straight down from mounting bayonet. Disconnect BCM wiring connectors. Remove junction block/BCM assembly from vehicle. Remove 2 screws attaching BCM to junction block. Release 2 latches holding BCM to junction block. Remove junction block. To install, reverse removal procedure.

Remote Keyless Entry (RKE) System Wiring Diagram. Scheme 4

Scheme 4: Remote Keyless Entry (RKE) System Wiring Diagram
Scheme 4: Remote Keyless Entry (RKE) System Wiring Diagram

More articles — Keyless Entry System - Remote