Removal & Installation
Remove wiper motor bolts. Pull motor out just slightly. Disconnect wiper linkage from motor assembly and remove motor. To install, reverse removal procedure.
- Remove air bag module. See appropriate AIR BAG RESTRAINT SYSTEM article in the ACCESSORIES/SAFETY EQUIPMENT section. Refer to the following list. Remove steering wheel. Remove knee protector. Dodge Stealth, see: AIR BAG RESTRAINT SYSTEM Mitsubishi 3000GT, see: «AIR BAG RESTRAINT SYSTEM»(ref-27817)
- Remove upper and lower steering column covers. (Схема №3) Remove lap cooler duct and foot shower duct. Remove left or right column switch. To install, reverse removal procedure.
Remove wiper blade and arm assembly. Remove tailgate trim, 2 bolts and wiper motor. To install, reverse removal procedure. Ensure grommet is in good condition.
Relay is located behind right rear quarter trim.
Pry rear wiper switch from instrument panel and disconnect wiper switch. To install switch, reverse removal procedure.