Power Windows: Other Dodge Pickup R1500

WINDOW SWITCH

The power window switches control the battery and ground feeds to the power window motors. The passenger door power window switches receive their battery and ground feeds through the circuitry of the driver's window switch. When the power window lockout switch is in the Lock position, the battery feed for the passenger door window switches is interrupted.

WINDOW MOTOR

Window motors use permanent type magnets. The B+ and ground applied at the motor terminal pins will cause the motor to rotate in one direction. Reversing current through the motor terminals will cause the motor to rotate in the opposite direction.

Refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds.

FRONT PASSENGER

1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel. Refer to «DOORS - FRONT»(ref-189710) .
3. Remove the switch from the trim panel bezel.

REAR PASSENGER

1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel. Refer to «DOORS - REAR»(ref-189711) .
3. Gently pry switch from door trim panel.

1. Insert switch to trim panel bezel.
2. Install door trim panel. Refer to «DOORS - FRONT»(ref-189710) .
3. Connect battery negative cable.

1. Install switch to door trim panel
2. Install door trim panel. Refer to «DOORS - REAR»(ref-189711) .
3. Connect battery negative cable.