SPECIFICATIONS
| Component | Fluids, Lubricants and Genuine Parts |
|---|---|
| Engine Coolant | Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. |
| Engine Oil (2.7L) | Use API Certified SAE 5W-20 Engine Oil meeting the requirements of Chrysler Material Standard MS-6395. Refer to the engine oil fill cap for correct SAE grade. |
| Engine Oil (3.5L) | Use API Certified engine oil. SAE 10W-30 is recommended. Refer to the engine oil viscosity chart for the correct SAE grade meeting Chrysler Material Standard MS-6395. |
| Engine Oil (5.7L) | Use API Certified SAE 5W-20 Engine Oil meeting the requirements of Chrysler Material Standard MS-6395. Refer to the engine oil fill cap for correct SAE grade. |
| Engine Oil (6.1L) | For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SM or SM/CF, and meet the requirements of Chrysler Material Standard MS-10725. The manufacturer recommends the use of a full synthetic engine oil, such as Mobil 1® SAE 0W-40 or equivalent. |
| Spark Plugs (2.7L) | RE14PMC5 (Gap .050 in [1.27 mm]) |
| Spark Plugs (3.5L) | ZFR5LP-13G (Gap .050 in [1.27 mm]) |
| Spark Plugs (5.7L) | REC14MCC4 (Gap .043 in [1.1 mm]) |
| Spark Plugs (6.1L) | PLZTR5A-13 (Gap .050 in [1.27 mm]) |
| Oil Filter (2.7L) | Mopar ® 05281090 or equivalent. |
| Oil Filter (3.5L) | Mopar ® 05281090 or equivalent. |
| Oil Filter (5.7L) | Mopar ® 05281090 or equivalent. |
| Oil Filter (6.1L) | Mopar ® 05281090 or equivalent. |
| Fuel Selection (2.7L) | 87 Octane |
| Fuel Selection (3.5L) | 87 to 89 Octane |
| Fuel Selection (5.7L) | 87 to 89 Octane |
| Fuel Selection (6.1L) | Premium Unleaded 91 Octane Only or higher. |
ENGINE - EXCEPT EXPORT
| Component | Fluids, Lubricants and Genuine Parts |
|---|---|
| Engine Coolant | Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) |
| Engine Oil (2.7L & 5.7L) - Non ACEA Categories | Use API Certified SAE 5W-20 engine oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade. SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available. |
| Engine Oil (2.7L & 5.7L) - ACEA Categories | For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils meeting the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51. SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available. |
| Engine Oil (3.5L) - Non ACEA Categories | Use API Certified SAE 10W-30 engine oil, meeting Chrysler Material Standard MS-6395 and approved to MB 229.31 or MB 229.51. Refer to your engine oil filler cap for correct SAE grade. |
| Engine Oil (3.5L) - ACEA Categories | For countries that use the ACEA European Oil Categories for Service Fill Oils, use SAE 10W-30 engine oil meeting the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51. |
| Engine Oil (3.0L Diesel) - ACEA Categories | Use SAE 5W-30 Synthetic Low Ash engine oil, meeting the requirements of Chrysler Material Standard MS-11106 and approved to MB 229.31 or MB 229.51 and ACEA C3. |
| Engine Oil (6.1L) - Non ACEA Categories | For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils approved to MB 229.31 or MB 229.51, and meeting the requirements of Chrysler Material Standard MS-10725. The manufacturer recommends the use of a full synthetic engine oil, such as Mobil 1® SAE 0W-40 or equivalent. |
| Engine Oil (6.1L) - ACEA Categories | For countries that use the ACEA European Oil Categories for Service Fill Oils, use SAE 0W-40 engine oil meeting the requirements of ACEA C3 and approved to MB 229.31 or MB 229.51. |
| Spark Plugs (2.7L) | RE14PMC5 (Gap .050 in [1.27 mm]) |
| Spark Plugs (3.5L) | ZFR5LP-13G (Gap .050 in [1.27 mm]) |
| Spark Plugs (5.7L) | REC14MCC4 (Gap .043 in [1.1 mm]) |
| Spark Plugs (6.1L) | PLZTR5A-13 (Gap .050 in [1.27 mm]) |
| Oil Filter (2.7L) | Mopar ® 05281090 or equivalent. |
| Oil Filter (3.5L) | Mopar ® 05281090 or equivalent. |
| Oil Filter (5.7L) | Mopar ® 05281090 or equivalent. |
| Oil Filter (6.1L) | Mopar ® 05281090 or equivalent. |
| Oil Filter (3.0L Diesel) | Mopar ® 05175571AA or equivalent. |
| Fuel Selection (2.7L) | 91 Octane |
| Fuel Selection (3.5L) | 91 Octane Acceptable - 95 Octane Recommended |
| Fuel Selection (5.7L | 91 Octane Acceptable - 95 Octane Recommended |
| Fuel Selection (6.1L) | Premium Unleaded 98 Octane |
| Fuel Selection (3.0 L Diesel) | Use good quality diesel fuel from a reputable supplier in your vehicle. The manufacturer requires that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions control system. For most year-round service, No. 2 diesel fuel meeting ASTM specification D-975 Grade S15 will provide good performance. If the vehicle is exposed to extreme cold (below 20F or -7C), or is required to operate at colder-than-normal conditions for prolonged periods, use climatized No. 2 diesel fuel or dilute the No. 2 diesel fuel with 50% No. 1 diesel fuel. This will provide better protection from fuel gelling or wax-plugging of the fuel filters. This vehicle is fully compatible with biodiesel blends up to 5% biodiesel meeting ASTM specification D-975. |
ENGINE - EXPORT
| Component | Fluids, Lubricants, and Genuine Parts |
|---|---|
| Automatic Transmission | Mopar ® ATF+4 Automatic Transmission Fluid |
| Brake Master Cylinder | Mopar ® DOT 3, SAE J1703 or equivalent should be used. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. |
| Front Axle | API GL-5 SAE 75W90 Synthetic Gear Lubricant or equivalent |
| Power Steering Reservoir | Mopar ® Power Steering Fluid + 4, Mopar ® ATF+4 Automatic Transmission Fluid |
| Rear Axle | API GL-5 SAE 75W140 Synthetic Gear Lubricant or equivalent |
| Transfer Case | Mopar ® Transfer Case Lubricant LX, P/N 05170055AA, or equivalent |
CHASSIS
| DESCRIPTION | U.S. | Metric |
|---|---|---|
| Fuel (approximate) | ||
| 2.7/3.5 Liter Engines RWD | 18 Gallons | 68 Liter |
| 2.7/3.5 Liter Engines AWD | 19 Gallons | 72 Liter |
| 5.7 Liter Engines | 19 Gallons | 72 Liter |
| 6.1 Liter Engine | 19 Gallons | 72 Liter |
| Engine Oil-With Filter | ||
| 2.7 Liter Engines | 6.0 Quarts | 5.7 Liter |
| 3.5 Liter Engines | 6.0 Quarts | 5.7 Liter |
| 5.7 Liter Engines | 7.0 Quarts | 6.6 Liter |
| 6.1 Liter Engine | 7.0 Quarts | 6.6 Liter |
| Cooling System * | ||
| 2.7 Liter Engines (Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile or equivalent. | 9.9 Quarts | 9.4 Liter |
| 3.5 Liter Engine without All Wheel Drive Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile or equivalent. | 11.1 Quarts | 10.5 Liter |
| 3.5 Liter Engine with All Wheel Drive Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile or equivalent. | 11.4 Quarts | 10.8 Liter |
| 5.7 Liter Engines Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile or equivalent. | 14.7 Quarts | 13.9 Liter |
| 5.7 Liter Engine with Severe Duty II Cooling System (Mopar® Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent | 15.1 Quarts | 14.3 Liter |
| 6.1 Liter Engine Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile or equivalent. | 15.2 Quarts | 14.4 Liter |
| * Includes heater and coolant recovery bottle filled to MAX level. | ||
| Power Steering System | ||
| Power steering fluid capacities are dependent on engine/chassis options as well as steering gear/cooler options. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these capacities may vary. Refer to STEERING for proper fill and bleed procedures. | ||
| A/C Refrigerant System | ||
| All Models | 1.625 Pounds | 0.737 kilograms |
| Automatic Transmission | ||
| Service Fill - NAG1 | 10.6 Pints | 5.0 Liter |
| Overhaul Fill - NAG1 | 16.3 Pints< | 7.7 Liter |
| Service Fill - 42RLE | 4.0 Quarts | 3.8 Liter |
| Overhaul Fill - 42RLE | 17.6 Pints< | 8.3 Liter |
| <--Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to STANDARD PROCEDURE . | ||
| Transfer Case | ||
| MS140 | 1.3 Pints | 0.6 Liter |
| Axle - Front | ||
| 175 MM FIA Axle | 0.63 Quarts | 600 ml |
| Axle - Rear | ||
| 198 MM RII Axle | 1.5 Quarts. | 1.4 Liter |
| 210 MM RII Axle | 1.7 Quarts. | 1.6 Liter |
| 215 MM RII Axle | 1.7 Quarts. | 1.6 Liter |
CAPACITIES - EXCEPT EXPORT
| DESCRIPTION | U.S. | Metric |
|---|---|---|
| Fuel (approximate) | ||
| 2.7/3.5 Liter Engine RWD | 18 Gallons | 68 Liter |
| 3.5 Liter Engine with AWD | 19 Gallons | 72 Liter |
| 5.7 Liter Engine | 19 Gallons | 72 Liter |
| 6.1 Liter Engine | 19 Gallons | 72 Liter |
| 3.0 Liter Diesel Engine | 19 Gallons | 72 Liter |
| Engine Oil with Filter | ||
| 2.7 Liter Engine | 6.0 Quarts | 5.7 Liter |
| 3.5 Liter Engine | 6.0 Quarts | 5.7 Liter |
| 5.7 Liter Engine | 7.0 Quarts | 6.6 Liter |
| 6.1 Liter Engine | 7.0 Quarts | 6.6 Liter |
| 3.0 Liter Diesel Engine | 10 Quarts | 9.5 Liter |
| Cooling System * | ||
| 2.7 Liter Engine (Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile) or equivalent. | 10.4 Quarts | 9.8 Liter |
| 3.5 Liter Engine (Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile) or equivalent. | 11.4 Quarts | 10.8 Liter |
| 5.7 Liter Engine (Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile) or equivalent. | 15.1 Quarts | 14.3 Liter |
| 6.1 Liter Engine (Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile) or equivalent. | 15.2 Quarts | 14.4 Liter |
| 3.0 Liter Diesel Engine (Mopar ® Antifreeze/Engine Coolant 5 Year/100,000 Mile) | 13.2 Quarts | 12.5 Liter |
| * Includes heater and coolant recovery bottle filled to MAX level. | ||
| Power Steering System | ||
| Power steering fluid capacities are dependent on engine/chassis options as well as steering gear/cooler options. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these capacities may vary. Refer to STEERING for proper fill and bleed procedures. | ||
| A/C Refrigerant System | ||
| All Models | 1.625 Pounds | 0.737 kilograms |
| Automatic Transmission | ||
| Service Fill - NAG1 | 10.6 Pints | 5.0 Liter |
| Overhaul Fill - NAG1 | 16.3 Pints< | 7.7 Liter |
| Service Fill - 42RLE | 4.0 Quarts | 3.8 Liter |
| Overhaul Fill - 42RLE | 17.6 Pints< | 8.3 Liter |
| <--Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to STANDARD PROCEDURE . | ||
| Transfer Case | ||
| MS140 | 1.3 Pints | 0.6 Liter |
| Axle - Front | ||
| 175 MM FIA Axle | 0.63 Quarts | 600 ml |
| Axle - Rear | ||
| 198 MM RII Axle | 1.5 Quarts. | 1.4 Liter |
| 210 MM RII Axle | 1.7 Quarts. | 1.6 Liter |
| 215 MM RII Axle | 1.7 Quarts. | 1.6 Liter |
CAPACITIES - EXPORT