Home ReviewsRefund Car not listed?
Home/Dodge/Magnum/Dodge Magnum I facelift (2007-2008)/Repair manual/Frames, Subframes & Crossmembers/Frame & Bumpers: Overview
Contents Section: Frames, Subframes & Crossmembers All sections

Frame & Bumpers: Overview Dodge Magnum I facelift

Frames, Subframes & Crossmembers
DESCRIPTIONN.mFt. Lbs.In. Lbs.
Front bumper bolts2821
Rear bumper bolts2821

Scheme 1

Scheme 1: FRONT SUSPENSION
Scheme 1: FRONT SUSPENSION

Scheme 2

Scheme 2
Scheme 2

Scheme 3

Scheme 3
Scheme 3

Scheme 4

Scheme 4: BUMPER-FRONT
Scheme 4: BUMPER-FRONT

Note. 300 Shown in illustration. Magnum and Charger similar.

  1. Remove fascia assembly. See REMOVAL .
  2. Drill out the four spot welds (2 per side) between the bumper bracket and rail end cap (1).
  3. Remove the eight screws (4 per side) and remove the bumper.

More articles — Frame & Bumpers