Home ReviewsRefund Car not listed?
Home/Dodge/Journey/Dodge Journey I (2007-2011)/Repair manual/Windows/Power Windows - Service Information: Removal & Installation
Contents Wiring diagrams Section: Windows All sections

Power Windows - Service Information: Removal & Installation Dodge Journey I

Windows

REMOVAL

  1. Disconnect and isolate the battery negative cable.
  2. Remove the door trim panel. Refer to «Body/Door - Front/PANEL, Door Trim - Removal»(ref-353577-S40808100392010011200000) .
  3. Disconnect the electrical connector.
  4. Remove the mounting fasteners and remove the motor.

INSTALLATION

  1. Install the window motor and install the mounting fasteners.
  2. Connect the electrical connector.
  3. Install the door trim panel. Refer to «Body/Door - Front/PANEL, Door Trim - Installation»(ref-353577-S06548906242010011200000) .
  4. Connect the battery negative cable.
SWITCH - FRONT DOORRefer to the SWITCH - FRONT DOOR removal procedure.
SWITCH - REAR DOORRefer to the SWITCH - REAR DOOR removal procedure.
SWITCH - FRONT DOORRefer to the SWITCH - FRONT DOOR installation procedure.
SWITCH - REAR DOORRefer to the SWITCH - REAR DOOR installation procedure.

More articles — Power Windows - Service Information