Ignition Control - Service Information: Removal & Installation Dodge Journey I

REMOVAL

1. Disconnect the glow plug module harness connector (1)
2. Remove the fastener (3).
3. Remove the glow plug module (2).

INSTALLATION

1. Install the glow plug module (2).
2. Install the fastener (3).
3. Reconnect the glow plug module harness connector (1)

Scheme 17

Glow plugs are used to help start a cold or cool engine. The glow plugs will heat up and glow to heat the combustion chamber of each cylinder. An individual glow plug is used for each cylinder. Each glow plug is threaded into the cylinder head below the cylinder head cover.