Heating & Air Conditioning (Atc) - Electrical Diagnostics: Wiring Dodge Journey I

Additional Wiring

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Control drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar Diagnostic Trouble Codes (DTCs) can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present.

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Control drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar Diagnostic trouble Codes (DTCs) can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present.

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Control drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar DTCs can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present.

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

Perform the following steps prior to any diagnostic procedure(s).

1. Testing should only be performed with the battery fully charged to avoid false diagnosis.
2. With the scan tool, read Powertrain Control Module (PCM) Diagnostic Trouble Codes (DTCs). If PCM DTCs are present. Refer to «DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Diagnosis and Testing»(ref-353603-S18034344452010011200000) and perform the appropriate diagnostic procedure(s) before proceeding.
3. Depending on the vehicle configuration, with the scan tool, read Totally Integrated Power Module (TIPM) DTCs. If TIPM DTCs are present. Refer to «DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Diagnosis and Testing»(ref-353626) and perform the appropriate diagnostic procedure(s) before proceeding.
4. With the scan tool, read HVAC DTCs. Record all Stored, Active, and Pending DTC information.
5. With the scan tool, read the Environmental Data. Use this data to help identify the conditions in which the DTC was set.
6. Refer to the When Monitored and Set Conditions for this DTC. DTCs can set at ignition on, at start up, or operating under specific conditions.
7. Using the wiring diagram as a guide, inspect the wiring and connectors related to this circuit and clean/repair as necessary.
8. Check for controller software updates if applicable. Some conditions can be corrected by upgrading the controller software. NOTE: If the controller is updated with new software, with the scan tool, perform a HVAC Actuator Calibration Test.

1. Check for Service Information Tune-ups or Service Bulletins for any possible causes that may apply.

Did any of the above procedures repair the vehicle?

Yes

1. Testing is complete.
2. Perform the HVAC VERIFICATION TEST. See «DTC-Based Diagnostics/HVAC - Standard Procedure»(ref-353631-S26939983102010011200000) .

No