U140F-IMPLAUSIBLE ENGINE VARIANT DATA
For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAMS article .
Continuously with the ignition on, one valid CAN ID received at least once, and no U0002-CAN Bus Off Performance DTC present.
When the TCM detects an incorrect CAN ID from the PCM.
| Possible Causes |
|---|
| CAN BUS DTCS PRESENT |
| PCM DTCS PRESENT |
| TRANSMISSION CONTROL MODULE (TCM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to STANDARD PROCEDURE .
Continuously with the ignition on, one valid CAN ID received at least once, and no U0002-CAN Bus Off Performance DTC present.
When the TCM detects an incorrect CAN ID from the Front Control Module (FCM).
| Possible Causes |
|---|
| CAN BUS DTCS PRESENT |
| TRANSMISSION CONTROL MODULE (TCM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to STANDARD PROCEDURE .
Continuously with the ignition on, one valid CAN ID received at least once, and no U0002-CAN Bus Off Performance DTC present.
When the TCM detects an incorrect CAN ID from the Final Drive Control Module (FDCM).
| Possible Causes |
|---|
| CAN BUS DTCS PRESENT |
| FINAL DRIVE CONTROL MODULE DTCS PRESENT |
| TRANSMISSION CONTROL MODULE (TCM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to STANDARD PROCEDURE .
Continuously with the ignition on, one valid CAN ID received at least once, and no U0002-CAN Bus Off Performance DTC present.
When the TCM detects an incorrect CAN ID from the PCM.
| Possible Causes |
|---|
| CAN BUS DTCS PRESENT |
| PCM DTCS PRESENT |
| TRANSMISSION CONTROL MODULE (TCM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to STANDARD PROCEDURE .
Continuously with the ignition on, one valid CAN ID received at least once, and no U0002-CAN Bus Off Performance DTC present.
When the TCM detects an incorrect CAN ID from the Electronic Shift Module (ESM).
| Possible Causes |
|---|
| CAN BUS DTCS PRESENT |
| ELECTRONIC SHIFT MODULE DTCS PRESENT |
| TRANSMISSION CONTROL MODULE (TCM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to STANDARD PROCEDURE .
Continuously with the ignition on, one valid CAN ID received at least once, and no U0002-CAN Bus Off Performance DTC present.
When the TCM detects an incorrect CAN ID from the PCM.
| Possible Causes |
|---|
| CAN BUS DTCS PRESENT |
| PCM DTCS PRESENT |
| TRANSMISSION CONTROL MODULE (TCM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to STANDARD PROCEDURE .