Propeller Shaft: Component Locations — Propeller Shaft — Driveshaft & Universal Joints

Propeller Shaft: Component Locations Dodge Durango III

SPECIAL TOOLS

7663 - Inclinometer (Originally Shipped In Kit Number(s) 7663-MC, XJ594.)

Scheme 4: SPECIAL TOOLS

Scheme 5: REMOVAL

Note. Propeller shaft is serviced as an assembly only.

Place vehicle on floor or drive-on hoist with full weight of vehicle on suspension.
Shift transmission and transfer case (2) in to Neutral.
If equipped, remove skid plate. Refer to «PLATE, SKID, FRONT, REMOVAL»(ref-465925-S30284619522012042300000) or «PLATE, SKID, FRONT SUSPENSION, REMOVAL»(ref-465925-S37911096052012042300000) or «PLATE, SKID, FUEL TANK, REMOVAL»(ref-465925-S28353303122012042300000) or «PLATE, SKID, TRANSMISSION, REMOVAL»(ref-465925-S36372325342012042300000) or «PLATE, SKID, TRANSFER CASE, REMOVAL»(ref-465925-S36231615982012042300000) .
Support transfer case with jack stand and remove transmission crossmember. Refer to «CROSSMEMBER, TRANSMISSION, REMOVAL»(ref-465925-S23636888812012042300000) .
Mark a line across the C/V joints to companion flanges for installation reference.
Raise vehicle.
Remove bolts from C/V joints.
Push propeller shaft forward to clear transfer case companion flange and remove the shaft.