Home ReviewsRefund
Home/Dodge/Durango/Dodge Durango II (2003-2006)/Repair manual/Cooling System (Mechanical)/Transmission Cooler: Removal & Installation
Contents Wiring diagrams Section: Cooling System (Mechanical) All sections

Transmission Cooler: Removal & Installation Dodge Durango II

Cooling System (Mechanical)

INSTALLATION

  1. Position transmission cooler in vehicle.
  2. Install lower transmission cooler mounting bolt. Tighten to 10 N.NM (90 in. lbs.)
  3. Connect transmission cooler lines.
  4. Lower vehicle.
  5. Install upper transmission cooler mounting bolt. Tighten bolt to 10 N.m (90 in. lbs.).
  6. Install upper condenser/radiator seal.
  7. Check transmission fluid level (Refer to «CHECKING FLUID LEVEL»(ref-170067-S17426121062005010300000) ).

More articles — Transmission Cooler