Specifications & Procedures
| Application | New Belt - Lbs. (kg) | (1) Used Belt - Lbs. (kg) |
|---|
| 3.7L, 4.7L & 5.7L | (2) | (2) |
| (1) Belt is considered used after 15 minutes of service. (2) Automatic belt tensioner is used. Belt tension adjustment is not required. |
| (1) | Belt is considered used after 15 minutes of service. |
| (2) | Automatic belt tensioner is used. Belt tension adjustment is not required. |
BELT ADJUSTMENT SPECIFICATIONS
Scheme 1
Scheme 1: ROUTING ILLUSTRATIONS
Scheme 2
COOLING SYSTEM SPECIFICATIONS
| Application | Specification |
|---|
| Coolant Replacement Interval | 100,000 Miles Or 60 Months |
| Coolant Capacity (1) |
| 3.7L (2) | 16.2 Qts. (15.4L) |
| 4.7L | 16.2 Qts. (15.4L) |
| 5.7L | 16.2 Qts. (15.4L) |
| Pressure Cap | 19-23 psi (1.34-1.62 kg/cm 2 ) |
| Thermostat |
| Starts To Open | 195°F (90°C) |
| Fully Opens | N/A |
| (1) Capacities listed are approximate. (2) Filled to middle of cold fill range. |
| (1) | Capacities listed are approximate. |
| (2) | Filled to middle of cold fill range. |
COOLING SYSTEM SPECIFICATIONS
