TRANSMISSION OVERDRIVE SOLENOID & TRANSMISSION TORQUE CONVERTER CLUTCH (TCC) SOLENOID
Note. Transmission overdrive solenoid may also be referred to as overdrive solenoid or 3-4 shift solenoid.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Air Injection Pump |
| Mounting Bolt | 30 (40) |
| Pulley Bolts | (1) |
| Crankshaft Position Sensor Bolt |
| 2.5L | 14 (19) |
| 3.9L, 5.2L & 5.9L | (2) |
| 4.7L | 21 (28) |
| 8.0L | (2) |
| Downstream Oxygen Sensor | 22 (30) |
| Distributor Hold-Down Bolt | 17 (23) |
| Engine Coolant Temperature Sensor |
| Except 8.0L | 8 (11) |
| 8.0L | (3) |
| Fuel Pump Module Lock Nut |
| Dakota | 40 (54) |
| Ram Pickup | 18-32 (24-44) |
| Ram Van & Ram Wagon | 40 (54) |
| Fuel Rail Bolt |
| 2.5L | (4) |
| 3.9L, 5.2L & 5.9L | 17 (23) |
| 4.7L | 20 (27) |
| 8.0L | (5) |
| Fuel Tank Strap Nut |
| Dakota & Durango | 30-40 (27-54) |
| Ram Pickup | 30 (41) |
| Ram Van & Ram Wagon | (6) |
| IAT Sensor |
| Except 8.0L | 20 (27) |
| 8.0L | (7) |
| Park/Neutral Switch | 25 (34) |
| Spark Plug | 30 (41) |
| Upper Intake Manifold Bolt (8.0L) | (8) 16 (22) |
| Upstream Oxygen Sensor | 22 (30) |
| Wheel Lug Nut (Dakota & Durango) | 100 (136) |
| INCH Lbs. (N.m) |
| Air Cleaner Housing-To-Throttle Body Clamp (Except Ram Pickup 8.0L) | 96 (10.8) |
| Air Cleaner Housing-To-Throttle Body Nut (Ram Pickup 8.0L) | 96 (10.8) |
| Camshaft Position Sensor Bolt |
| 4.7L | 106 (12) |
| 8.0L | 50 (6) |
| EVAP Canister Mounting Bracket-To Body Nut (Ram Van & RamWagon) | 95 (10.7) |
| EVAP Canister-To-Mounting Bracket Nut |
| Dakota & Durango | 17 (23) |
| Ram Pickup | (9) |
| Ram Van & Ram Wagon | (10) |
| EVAP Leak Detection Pump Bolt | 65 (7) |
| EVAP Purge Solenoid Nut (Dakota & Durango) | 75 (8.5) |
| IAC Motor Bolt | 60 (7) |
| Ignition Coil Bolt/Nut |
| Dakota, Durango, Ram Van & Ram Wagon |
| 2.5L, 3.9L, 5.2L & 5.9L | (11) |
| 4.7L | 70 (8) |
| Ram Pickup |
| 3.9L, 5.2L & 5.9L | (11) |
| 8.0L | 90 (10.2) |
| MAP Sensor Bolt |
| 8.0L | 20 (2.3) |
| Except 8.0L | 25 (2.8) |
| PCM Bolt | 35 (4.0) |
| Power Steering Pressure Switch (2.5L & 4.7L) | 124-195 (14-22) |
| Throttle Body Bolt |
| 2.5L & 4.7L | 100 (11) |
| 3.9L, 5.2L & 5.9L | 200 (23) |
| Throttle Body Nut (8.0L) | 192 (22) |
| TP Sensor Bolt | 60 (7) |
| (1) Tighten bolts to 105 INCH lbs. (11 N.m). (2) Tighten retaining bolts to 70 INCH lbs. (7.9 N.m). (3) Tighten to 55-75 INCH lbs. (6-8 N.m). (4) Tighten bolts to 100 INCH lbs. (11.3 N.m). (5) Tighten to 136 INCH lbs. (15 N.m). (6) Tighten retaining nuts to 60 INCH lbs. (6.8 N.m). (7) Tighten to 110-130 INCH lbs. (12-15 N.m). (8) Tighten bolts to specification in sequence. (Схема №57) (9) Tighten nuts to 80 INCH lbs. (9.0 N.m). (10) Tighten nuts to 71 INCH lbs. (8.0 N.m). (11) On ignition coil using only bolts, tighten bolts to 50 INCH lbs. (5.6 N.m). On ignition coil using bolts and nuts, tighten bolts/nuts to 100 INCH lbs. (11.3 N.m). |
| (1) | Tighten bolts to 105 INCH lbs. (11 N.m). |
| (2) | Tighten retaining bolts to 70 INCH lbs. (7.9 N.m). |
| (3) | Tighten to 55-75 INCH lbs. (6-8 N.m). |
| (4) | Tighten bolts to 100 INCH lbs. (11.3 N.m). |
| (5) | Tighten to 136 INCH lbs. (15 N.m). |
| (6) | Tighten retaining nuts to 60 INCH lbs. (6.8 N.m). |
| (7) | Tighten to 110-130 INCH lbs. (12-15 N.m). |
| (8) | Tighten bolts to specification in sequence. (Схема №57) |
| (9) | Tighten nuts to 80 INCH lbs. (9.0 N.m). |
| (10) | Tighten nuts to 71 INCH lbs. (8.0 N.m). |
| (11) | On ignition coil using only bolts, tighten bolts to 50 INCH lbs. (5.6 N.m). On ignition coil using bolts and nuts, tighten bolts/nuts to 100 INCH lbs. (11.3 N.m). |
