REMOVAL & INSTALLATION
| WARNING | Deactivate air bag system before performing any service operation near steering column. See AIR BAG RESTRAINT SYSTEMS - TRUCKS article. |
Note. For power lock component removal and installation, see POWER DOOR LOCKS & LIFTGATE RELEASE - DAKOTA, DURANGO & RAM PICKUP article.
Removal & Installation (Dakota & Durango)
Disconnect negative battery cable. Remove glove box. Remove screws holding CTM and bracket on outboard side of glove box opening. Lower CTM enough to access and remove harness connectors. Remove CTM. To install, reverse removal procedure. Program replacement CTM. See PROGRAMMING .
Removal & Installation (Ram Pickup)
Disconnect negative battery cable. Remove steering column opening cover and knee blocker. Remove screws holding CTM to bracket on inboard side of instrument panel steering column opening. Lower CTM enough to access and remove harness connectors. Remove CTM. To install, reverse removal procedure. Program replacement CTM. See PROGRAMMING .
