SPECIFICATIONS
| DESCRIPTION | SPECIFICATIONS |
|---|
| Front |
| Front Disc Brake Caliper Type | Single Piston Sliding |
| Front Disc Brake Caliper | 1 x 60 mm (2.362 in.) |
| Front Disc Brake Rotor Diameter | 305 mm (12.01 in.) |
| Front Disc Brake Rotor Thickness | 28 mm (1.102 in.) |
| Front Disc Brake Rotor Maximum Runout | 0.020 mm (0.0008 in.) |
| Front Disc Brake Rotor Maximum Thickness Variation | 0.008 mm (0.0003 in.) |
| Front Disc Brake Rotor Minimum Thickness | 26 mm (1.024 in.) |
| Rear |
| Rear Disc Brake Caliper Type | Single Piston Sliding |
| Rear Disc Brake Caliper | 1 x 38 mm (1.496 in.) |
| Rear Disc Brake Rotor Diameter | 264 mm (10.39 in.) |
| Rear Disc Brake Rotor Thickness | 10 mm (0.3937 in.) |
| Rear Disc Brake Rotor Maximum Runout | 0.020 mm (0.0008 in.) |
| Rear Disc Brake Rotor Maximum Thickness Variation | 0.009 mm (0.0004 in.) |
| Rear Disc Brake Rotor Minimum Thickness | 8 mm (0.3150 in.) |
TORQUE
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|
| ABS ICU Mounting Bolt (To Bracket) | 8 | | 71 |
| ABS ICU Mounting Bracket Screws (To Frame) | 25 | 18 | 221 |
| ABS Wheel Speed Sensor Head Mounting Screw - Front | 12 | | 106 |
| ABS Wheel Speed Sensor Head Mounting Screw - Rear | 12 | | 106 |
| ABS Wheel Speed Sensor Routing Bracket Mounting Screw | 12 | | 106 |
| Brake Flex Hose Fitting - Front Caliper | 18 | | 159 |
| Brake Flex Hose Fitting- Rear Caliper | 18 | | 159 |
| Brake Pedal/Booster Mounting Nuts | 22 | | 195 |
| Brake Tube Nuts | 18 | | 159 |
| Disc Brake Caliper Adapter Bracket - Front | 175 | 129 | |
| Disc Brake Caliper Adapter Bracket - Rear | 65 | 48 | |
| Disc Brake Caliper Guide Pin Bolts - Front | 43 | 32 | |
| Disc Brake Caliper Guide Pin Bolts - Rear | 43 | 32 | |
| Front Rotor Retaining Bolt | 15 | | 133 |
| Rear Rotor Retaining Bolt | 20 | | 177 |
| Master Cylinder Mounting Nuts | 25 | | 216 |
| Parking Brake Lever Mounting Nuts | 35 | 26 | |
The brake fluid used in this vehicle must conform to DOT 3 specifications and SAE J1703 standards. No other type of brake fluid is recommended or approved for usage in the vehicle brake system. Use only Mopar® Brake Fluid DOT 3 Motor Vehicle or equivalent from a tightly sealed container.
| CAUTION | Never use reclaimed brake fluid or fluid from a container which has been left open. An open container will absorb moisture from the air and contaminate the fluid. |
| CAUTION | Never use any type of a petroleum-based fluid in the brake hydraulic system. Use of such type fluids will result in seal damage of the vehicle brake hydraulic system causing a failure of the vehicle brake system. Petroleum based fluids would be items such as engine oil, transmission fluid, power steering fluid, etc. |
