Power Windows - Service Information: Removal & Installation Dodge Challenger III рестайлинг

REMOVAL

1. Disconnect and isolate the negative battery cable.
2. Remove the door trim panel. Refer to «PANEL, DOOR TRIM, REMOVAL»(ref-489285-S14587999262012072600000) .
3. Disconnect the electrical connector.
4. Remove the mounting fasteners and remove the motor.

INSTALLATION

1. Install the window motor and install the mounting fasteners.
2. Connect the electrical connector.
3. Install the door trim panel. Refer to «PANEL, DOOR TRIM, INSTALLATION»(ref-489285-S04959540622012072600000) .
4. Connect the negative battery cable.

The power window switch and the power lock switch are serviced as an assembly. For more information, refer to SWITCH, LOCK, REMOVAL .

The power window switch and the power lock switch are serviced as an assembly. For more information, refer to INSTALLATION .