Starting System: Removal & Installation Dodge Caravan IV

INSTALLATION - 2.4L

1. Place starter in position on vehicle.
2. Install the lower bolts to hold starter to transaxle bellhousing.
3. Install the upper bolt and ground wire. (Схема №7)
4. Place solenoid and B+ wires in position on starter terminals. (Схема №6)
5. Install nut to hold B+ wire to terminal.
6. Connect solenoid wire connector onto terminal.
7. Connect battery negative cable.
8. Verify starter operation.

INSTALLATION - 3.3/3.8L

1. Place starter spacer in position on transaxle bellhousing, flange toward flywheel.
2. Place starter in position on bellhousing.
3. Install bolts and ground wire to hold starter to transaxle bellhousing. (Схема №7)
4. Connect solenoid connector into starter.
5. Install nut to hold B+ terminal to starter solenoid.
6. Lower vehicle.
7. Connect battery negative cable.
8. Verify starter operation.

INSTALLATION - 2.5L

1. Raise vehicle and support.
2. Install the starter.
3. Install the starter mounting bolts. (Схема №12)
4. Install the electrical connectors to the starter. (Схема №11)
5. Install the lower engine splash shield.
6. Connect the negative battery cable.
7. Lower vehicle.