REMOVAL & INSTALLATION
| CAUTION | When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section before disconnecting battery. |
- Remove cover from over steering column. Remove screws holding instrument cluster bezel to dash (above cluster lens). Remove screws holding instrument cluster bezel to dash from each side of steering column. Disconnect clip holding instrument cluster bezel to dash from above right vent louver.
- Separate instrument cluster bezel from dash. Disconnect wires from back of bezel. Disengage lock tabs above and below mirror switch. Pull mirror switch from headlight switch bezel. To install, reverse removal procedure.
Remove screw and power mirror front cover. Remove 3 mirror attaching screws and pull mirror away from door. Disconnect mirror electrical connectors. To install, reverse removal procedure.
