FLUID CAPACITIES
| Application | Refill - Qts. (L) | Dry Fill - Qts. (L) |
|---|
| 31TH | (2) 1.5 (1.4) | 9.0 (8.5) |
| 41TE | (2) 1.5 (1.4) | 9.1 (8.6) |
| (1) Approximate quantity listed. (2) Add this amount of fluid. Start engine and allow it to idle for at least one minute. With brakes applied, shift transaxle through all gears, ending in Park. Add additional fluid to bring level 1/8" below ADD mark on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level within HOT range on dipstick. |
| (1) | Approximate quantity listed. |
| (2) | Add this amount of fluid. Start engine and allow it to idle for at least one minute. With brakes applied, shift transaxle through all gears, ending in Park. Add additional fluid to bring level 1/8" below ADD mark on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level within HOT range on dipstick. |
TRANSAXLE REFILL CAPACITIES (1)
| Application | Qts. (L) |
|---|
| AWD Models | 1.2 (1.1) |
| (1) Approximate quantity listed. |
| (1) | Approximate quantity listed. |
POWER TRANSFER UNIT REFILL CAPACITIES (1)
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Kickdown Band Adjusting Screw Lock Nut | 35 (47) |
| Low-Reverse Band Adjusting Screw Lock Nut | 10 (14) |
| Oil Pan Bolt | 14 (19) |
| Power Transfer Unit Fill Plug | 20 (27) |
| INCH Lbs. (N.m) |
| Oil Filter Screw | 45 (5.1) |
| Shift Cable Retaining Nut | 70 (7.9) |
| Swivel Lock Screw | 100 (11.3) |
