Shift Lever Test
- Shift lever test will instruct technician to place gearshift in each gear position, starting in Park and proceeding to Low. Press ENTER key after placing gearshift in each gear position.
- The DRB-II will display one of the following conditions: shift lever test has been passed, shift linkage requires adjustment, or error code has been set. If an error code is set, refer to the «TROUBLE SHOOTING CHARTS»(/dodge/caravan/ii-1990-1995/remont/automatic-trans/#diagnosis-a-60441te__trouble-shooting-charts) and perform appropriate test indicated by chart. If adjust linkage is displayed, adjust shift cable or linkage. See appropriate TRANSMISSION SERVICING - A/T article in the AUTOMATIC TRANS SERVICING section. To return to previous menu, press ATM key. For Passenger Cars, see: TRANSMISSION SERVICING - A/T For Vans, see: TRANSMISSION SERVICING - A/T
| CAUTION | DO NOT perform clutch test immediately after driving vehicle without first turning ignition off. If ignition is not turned off first, the following message will be displayed: CANNOT PERFORM TEST AN UPSHIFT HAS OCCURRED. |