CAPACITIES
| CAUTION | If flexible fuel engine oil is not used when using E-85 fuel, engine wear or damage may result. |
FLUID CAPACITIES (CARAVAN, TOWN & COUNTRY, & VOYAGER)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (2) |
| 31TH (3-Speed) |
| Drain & Refill | (3) 4.0 Qts. (3.8L) |
| Dry Refill | 9.1 Qts. (8.6L) |
| 41TE (4-Speed) |
| Drain & Refill | (3) 4.0 Qts. (3.8L) |
| Dry Refill | 9.7 Qts. (9.2L) |
| Bidirectional Overrunning Clutch (AWD Models) (2) | 1.2 Pts. (.6L) |
| Cooling System (4) |
| 2.4L | 11.4 Qts. (10.8L) |
| 3.3L & 3.8L |
| With Rear Heater | 15.4 Qts. (14.6L) |
| Without Rear Heater | 13.4 Qts. (12.7L) |
| Crankcase (Includes Filter) (5) |
| 2.4L | 5.0 Qts. (4.7L) |
| 3.3L & 3.8L | 4.5 Qts. (4.3L) |
| Power Steering Fluid (6) | 2.5 Pts. (1.2L) |
| Power Transfer Unit (AWD Models) (7) | 1.2 Qts. (1.15L) |
| Rear Differential (AWD Models) (7) | 1.5 Pts. (.7L) |
| (1) Approximate quantity listed. (2) Use Mopar® ATF+4 Type 9602. (3) Estimated service refill. (4) Quantity includes heater and coolant recovery tank. (5) On all engines except 3.3L flex-fuel, use an API energy conserving engine oil that is certified for gasoline engines (5W-30 or 10W-30). On 3.3L flex-fuel models, use Mopar® Flex-Fuel 5W-30 engine oil or an equivalent that meets Chrysler Standard MS-9214. Equivalent engine oils may be labeled as Multi-Fuel, Variable Fuel, Flexible Fuel, etc. (6) Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid. (7) Use Mopar® Gear and Axle Lubricant (80W-90). |
| (1) | Approximate quantity listed. |
| (2) | Use Mopar® ATF+4 Type 9602. |
| (3) | Estimated service refill. |
| (4) | Quantity includes heater and coolant recovery tank. |
| (5) | On all engines except 3.3L flex-fuel, use an API energy conserving engine oil that is certified for gasoline engines (5W-30 or 10W-30). On 3.3L flex-fuel models, use Mopar® Flex-Fuel 5W-30 engine oil or an equivalent that meets Chrysler Standard MS-9214. Equivalent engine oils may be labeled as Multi-Fuel, Variable Fuel, Flexible Fuel, etc. |
| (6) | Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid. |
| (7) | Use Mopar® Gear and Axle Lubricant (80W-90). |
FLUID CAPACITIES (CARAVAN, TOWN & COUNTRY, & VOYAGER)
FLUID CAPACITIES (DAKOTA)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Mopar® ATF+4, Type 9602) |
| Drain & Refill |
| 42RE & 46RE | (2) 4.0 Qts. (3.8L) |
| 45RFE | (2) 5.0 Qts. (4.7L) |
| Dry Refill |
| 42RE & 46RE | 9.6-10.0 Qts. (9.1-9.5L) |
| 45RFE | 14.1 Qts. (13.3L) |
| Cooling System (Includes Heater) |
| 2.5L | 9.8 Qts. (9.3L) |
| 3.9L | 14.0 Qts. (13.2L) |
| 4.7L | 13.0 Qts. (12.3L) |
| 5.9L | 14.6 Qts. (13.8L) |
| Crankcase (Includes Filter) (3) |
| 2.5L | 4.5 Qts. (4.3L) |
| 3.9L | 4.0 Qts. (3.8L) |
| 4.7L | 6.0 Qts. (5.7L) |
| 5.9L | 5.0 Qts. (4.7L) |
| Front Differential (SAE 80W-90) |
| C205F | 3.5 Pts. (1.7L) |
| Manual Transmission (4) |
| NV1500 (2.5L) | (5) |
| NV 3500 (3.9 & 4.7L) | 4.8 Pts. (2.3L) |
| Power Steering Fluid (6) | (5) |
| Rear Differential (7) |
| 8 1/4" Ring Gear (SAE 80W-90) (8) | 4.7 Pts. (2.2L) |
| 9 1/4" Ring Gear (SAE 75W-90) (8) | 4.9 Pts. (2.3L) |
| Transfer Case (Mopar® ATF+4, Type 9602) |
| NV233 | 2.5 Pts. (1.2L) |
| NV244 | 2.9 Pts. (1.4L) |
| (1) Approximate quantity listed. (2) Estimated service refill. (3) Use an API energy conserving engine oil that is certified for gasoline engines. On 2.5L, 3.9L and 5.9L, use 10W-30 (preferred) or 5W-30. On 4.7L, use 5W-30 (preferred) or 10W-30. (4) Use Mopar® M/T Lube, P/N 4874464. Proper oil level is to bottom of fill hole. (5) Information is not available from manufacturer. (6) Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid. (7) Models with Trac-Lok limited slip differential must have 5 ozs. (.15L) of Mopar® Trac-Lok Friction Modifier added if lubricant is changed. Lubricant capacity includes friction modifier. (8) Rear differential may be identified by number of bolts on rear cover. The 8 1/4" ring gear has 10 bolts on rear cover and 9 1/4" ring gear has 12 bolts on rear cover. |
| (1) | Approximate quantity listed. |
| (2) | Estimated service refill. |
| (3) | Use an API energy conserving engine oil that is certified for gasoline engines. On 2.5L, 3.9L and 5.9L, use 10W-30 (preferred) or 5W-30. On 4.7L, use 5W-30 (preferred) or 10W-30. |
| (4) | Use Mopar® M/T Lube, P/N 4874464. Proper oil level is to bottom of fill hole. |
| (5) | Information is not available from manufacturer. |
| (6) | Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid. |
| (7) | Models with Trac-Lok limited slip differential must have 5 ozs. (.15L) of Mopar® Trac-Lok Friction Modifier added if lubricant is changed. Lubricant capacity includes friction modifier. |
| (8) | Rear differential may be identified by number of bolts on rear cover. The 8 1/4" ring gear has 10 bolts on rear cover and 9 1/4" ring gear has 12 bolts on rear cover. |
FLUID CAPACITIES (DAKOTA)
FLUID CAPACITIES (DURANGO)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Mopar® ATF+4, Type 9602) |
| Drain & Refill |
| 46RE | (2) 4.0 Qts. (3.8L) |
| 45RFE | (2) 5.0 Qts. (4.7L) |
| Dry Refill |
| 46RE | (3) 9.6-10.0 Qts. (9.1-9.5L) |
| 45RFE | (3) 14.0 Qts. (13.3L) |
| Cooling System (Includes Heater) |
| 4.7L | 17.0 Qts. (16.0L) |
| 5.9L | 14.3 Qts. (13.5L) |
| Crankcase (Includes Filter) (4) |
| 4.7L | 6.0 Qts. (5.7L) |
| 5.9L | 5.0 Qts. (4.7L) |
| Front Differential (SAE 80W-90/API GL-5) |
| C205F | 3.5 Pts. (1.6L) |
| Power Steering Fluid (5) | (6) |
| Rear Differential (SAE 80W-90/API GL-5) (7) |
| 8 1/4" Ring Gear (8) | 4.4 Pts. (2.1L) |
| 9 1/4" Ring Gear (8) | 4.9 Pts. (2.3L) |
| Transfer Case (Mopar® ATF+4 Type 9602) (9) |
| NV 233 | 2.5 Pts. (1.2L) |
| NV 244 | 2.9 Pts. (1.4L) |
| (1) Approximate quantity listed. (2) Estimated service refill. (3) Quantity may vary by type of oil cooler and oil cooler lines. (4) Use an API energy conserving engine oil that is certified for gasoline engines. On 4.7L, use 5W-30 (preferred) or 10W-30. On 5.9L, use 10W-30 (preferred) or 5W-30. (5) Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid. (6) Fluid capacities vary with engine/chassis options and steering gear/cooler options. Specification is not available from manufacturer. (7) Models with Trac-Lok limited slip differential must have 5 ozs. (.15L) of Mopar® Trac-Lok Friction Modifier added if lubricant is changed. Lubricant capacity includes friction modifier. (8) Rear differential may be identified by number of bolts on rear cover. The 8 1/4" ring gear has 10 bolts on rear cover and 9 1/4" ring gear has 12 bolts on rear cover. Fill to bottom of fill hole. (9) Transfer case may be identified by model number stamped on identification tag on rear of transfer case, just above fill plug. Fill to bottom of fill plug hole. |
| (1) | Approximate quantity listed. |
| (2) | Estimated service refill. |
| (3) | Quantity may vary by type of oil cooler and oil cooler lines. |
| (4) | Use an API energy conserving engine oil that is certified for gasoline engines. On 4.7L, use 5W-30 (preferred) or 10W-30. On 5.9L, use 10W-30 (preferred) or 5W-30. |
| (5) | Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid. |
| (6) | Fluid capacities vary with engine/chassis options and steering gear/cooler options. Specification is not available from manufacturer. |
| (7) | Models with Trac-Lok limited slip differential must have 5 ozs. (.15L) of Mopar® Trac-Lok Friction Modifier added if lubricant is changed. Lubricant capacity includes friction modifier. |
| (8) | Rear differential may be identified by number of bolts on rear cover. The 8 1/4" ring gear has 10 bolts on rear cover and 9 1/4" ring gear has 12 bolts on rear cover. Fill to bottom of fill hole. |
| (9) | Transfer case may be identified by model number stamped on identification tag on rear of transfer case, just above fill plug. Fill to bottom of fill plug hole. |
FLUID CAPACITIES (DURANGO)
FLUID CAPACITIES (RAM PICKUP)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Mopar® ATF+3, Type 7176) |
| 42RE |
| Drain & Refill | (2) 1.5 Qts. (1.4L) |
| Dry Refill | (3) 8.5-11.0 Qts. (8.0-10.4L) |
| 46RE |
| Drain & Refill | (2) 1.5 Qts. (1.4L) |
| Dry Refill | (3) 9.5-11.6 Qts. (9.0-11.0L) |
| 47RE |
| Drain & Refill | (2) 1.5 Qts. (1.4L) |
| Dry Refill | (3) 14.7-16.9 Qts. (14.0-16.0L) |
| Cooling System (Includes Heater) |
| 3.9L, 5.2L & 5.9L (Gasoline) | 20.0 Qts. (18.9L) |
| 5.9L (Diesel) | 24.0 Qts. (22.7L) |
| 8.0L | 26.0 Qts. (24.6L) |
| Crankcase (Includes Filter) (4) |
| 3.9L | 4.5 Qts. (4.2L) |
| 5.2L & 5.9L (Gasoline) | 5.0 Qts. (4.7L) |
| 5.9L (Diesel) | 11.0 Qts. (10.4L) |
| 8.0L | 7.0 Qts. (6.6L) |
| Front Differential (SAE 80W-90/API GL-5) |
| Dana 44 (Model 216-FBI) (5) | 4.8 Pts. (2.3L) |
| Dana 60 (Model 248-FBI) (6) | 8.5 Pts. (4.0L) |
| Manual Transmission (7) |
| NV 3500 (Mopar® M/T Lube, P/N 4874464) | 2.1 Qts. (2.0L) |
| NV 4500 & NV 4500HD (Mopar® M/T Lube, P/N 4874459) (8) | 4.0 Qts. (3.8L) |
| NV5600 (Mopar® M/T Lube , P/N 4874464) (8) | 4.7 Qts. (4.5L) |
| Power Steering Fluid | (9) |
| Power Take-Off (PTO) Adapter (Mopar ATF+3, Type 7176) 2500 & 3500 Models 2WD With A/T | 4.6 Pts. (2.2L) |
| Rear Differential |
| 9 1/4" Ring Gear (SAE 75W-90/API GL-5) (10) | 4.9 Pts. (2.3L) |
| Dana 60 (Model 248-RBI) (SAE 90W/API GL-5) (11) |
| 2WD | 6.3 Pts. (3.0L) |
| 4WD | 7.0 Pts. (3.4L) |
| Dana 70 (Model 267-RBI) (SAE 90W/API GL-5) (12) |
| 2WD | 7.0 Pts. (3.3L) |
| 4WD | 7.5 Pts. (3.6L) |
| Dana 80 (Model 286-RBI) (SAE 85W-90/API GL-5) (13) |
| 2WD | 6.8 Pts. (3.2L) |
| 4WD | 10.1 Pts. (4.8L) |
| Transfer Case (Mopar® ATF+3, Type 7176 Or Mopar® Dexron III) (14) |
| NV 231HD | 3.0-3.6 Pts. (1.4-1.7L) |
| NV 241LD | 5.0 Pts. (2.4L) |
| NV 241HD With Power Take-Off (PTO) | 10.3 Pts. (4.9L) |
| NV 241HD Without PTO | 6.5 Pts. (3.1L) |
| (1) Approximate quantity listed. (2) Add this amount of fluid. Start engine and shift transmission through all gears and back to Neutral. Add additional fluid to bring fluid level to the MIN mark on dipstick. Recheck fluid level with transmission at normal operating temperature. Adjust fluid level to MAX mark on dipstick. Approximate drain and refill capacity is 4.0 qts. (3.8L). (3) Quantity may vary by type of oil cooler and oil cooler lines. (4) On gasoline engines, use an API energy conserving engine oil that is certified for gasoline engines. Recommended oil viscosity is 10W-30 (preferred) or 5W-30. On diesel engines, use engine oil with API CF-4/SH or CG-4/SH rating for diesel engines. See owners manual for viscosity recommendations. (5) Axle can be identified by a tag attached to differential cover. (6) Axle can be identified by model number stamped onto flange next to differential cover. (7) Verify type of transmission used before servicing. The NV 3500 uses a flywheel housing which is an integral part of the transmission housing. The NV 4500 uses a flywheel housing which is bolted to the front of the transmission and transmission contains a Power Take-Off (PTO) cover on passenger side of transmission. (8) Heavy-duty transmission is used with 5.9L diesel and 8.0L. (9) Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid. Capacity is not available. (10) Models with Trac-Lok limited slip differential must have 5 ozs. (.15L) of friction modifier added if lubricant is changed. Fluid capacity includes friction modifier, if added. (11) Models with Trac-Lok limited slip differential must have 6 ozs. (.18L) of friction modifier added if lubricant is changed. Fluid capacity includes friction modifier, if added. (12) Models with Power-Lok limited slip differential must have 8 ozs. (.24L) of friction modifier added if lubricant is changed. Fluid capacity includes friction modifier, if added. (13) Models with Trac-Lok limited slip differential must have friction modifier added if lubricant is changed. Add 8 ozs. (.24L) of modifier on 2WD models or 10 ozs. (.30L) on 4WD models. Fluid capacity includes friction modifier, if added. (14) Transfer case may be identified by model number stamped on identification tag on rear of transfer case, just above filler plug. DO NOT use anti-friction additives. |
| (1) | Approximate quantity listed. |
| (2) | Add this amount of fluid. Start engine and shift transmission through all gears and back to Neutral. Add additional fluid to bring fluid level to the MIN mark on dipstick. Recheck fluid level with transmission at normal operating temperature. Adjust fluid level to MAX mark on dipstick. Approximate drain and refill capacity is 4.0 qts. (3.8L). |
| (3) | Quantity may vary by type of oil cooler and oil cooler lines. |
| (4) | On gasoline engines, use an API energy conserving engine oil that is certified for gasoline engines. Recommended oil viscosity is 10W-30 (preferred) or 5W-30. On diesel engines, use engine oil with API CF-4/SH or CG-4/SH rating for diesel engines. See owners manual for viscosity recommendations. |
| (5) | Axle can be identified by a tag attached to differential cover. |
| (6) | Axle can be identified by model number stamped onto flange next to differential cover. |
| (7) | Verify type of transmission used before servicing. The NV 3500 uses a flywheel housing which is an integral part of the transmission housing. The NV 4500 uses a flywheel housing which is bolted to the front of the transmission and transmission contains a Power Take-Off (PTO) cover on passenger side of transmission. |
| (8) | Heavy-duty transmission is used with 5.9L diesel and 8.0L. |
| (9) | Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid. Capacity is not available. |
| (10) | Models with Trac-Lok limited slip differential must have 5 ozs. (.15L) of friction modifier added if lubricant is changed. Fluid capacity includes friction modifier, if added. |
| (11) | Models with Trac-Lok limited slip differential must have 6 ozs. (.18L) of friction modifier added if lubricant is changed. Fluid capacity includes friction modifier, if added. |
| (12) | Models with Power-Lok limited slip differential must have 8 ozs. (.24L) of friction modifier added if lubricant is changed. Fluid capacity includes friction modifier, if added. |
| (13) | Models with Trac-Lok limited slip differential must have friction modifier added if lubricant is changed. Add 8 ozs. (.24L) of modifier on 2WD models or 10 ozs. (.30L) on 4WD models. Fluid capacity includes friction modifier, if added. |
| (14) | Transfer case may be identified by model number stamped on identification tag on rear of transfer case, just above filler plug. DO NOT use anti-friction additives. |
FLUID CAPACITIES (RAM PICKUP)
FLUID CAPACITIES (RAM VAN & RAM WAGON)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Mopar® ATF+4, Type 9602) |
| 32RH |
| Drain & Refill | (2) 1.5 Qts. (1.4L) |
| Dry Refill | (3) 6.7-6.9 Qts. (6.3-6.5L) |
| 46RE |
| Drain & Refill | (2) 1.5 Qts. (1.4L) |
| Dry Refill | (3) 9.6-10.0 Qts. (9.1-9.5L) |
| Cooling System (Includes Heater) |
| 3.9L | 14.5 Qts. (13.7L) |
| 5.2L | 16.6 Qts. (15.7L) |
| 5.9L |
| With Rear Heater | 16.1 Qts. (15.2L) |
| Without Rear Heater | 15.0 Qts. (14.2L) |
| Crankcase (Includes Filter) (4) |
| 3.9L | 4.0 Qts. (3.8L) |
| 5.2L & 5.9L | 5.0 Qts. (4.7L) |
| Power Steering Fluid | (5) |
| Rear Differential |
| Dana 60 (Model 248 - SAE 90/API GL-5) (6) (7) | 6.3 Pts. (2.9L) |
| 8 1/4" & 9 1/4" Ring Gear (SAE 80W-90/API GL-5) (7) (8) | 4.4 Pts. (2.1L) |
| (1) Approximate quantity listed. (2) Add this amount of fluid. Start engine and shift transmission through all gears and back to Neutral. Add additional fluid to bring fluid level to the MIN mark on dipstick. Recheck fluid level with transmission at normal operating temperature. Adjust fluid level to MAX mark on dipstick. Approximate drain and refill capacity is 4.0 qts. (3.8L). (3) Quantity may vary by type of oil cooler and oil cooler lines. (4) Use an API energy conserving engine oil that is certified for gasoline engines. Recommended oil viscosity is 10W-30 (preferred) or 5W-30. (5) Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid. Capacity is not available from manufacturer. (6) Rear differential may be identified by full-floating axle shafts. (7) Models with Trac-Lok limited slip differential must have 5 ozs. (.15L) of Mopar® Trac-Lok friction modifier added if lubricant is changed. Fluid capacity includes friction modifier, if added. (8) Rear differential may be identified by number of bolts on rear cover. The 8 1/4" ring gear has 10 bolts on rear cover and 9 1/4" ring gear has 12 bolts on rear cover. |
| (1) | Approximate quantity listed. |
| (2) | Add this amount of fluid. Start engine and shift transmission through all gears and back to Neutral. Add additional fluid to bring fluid level to the MIN mark on dipstick. Recheck fluid level with transmission at normal operating temperature. Adjust fluid level to MAX mark on dipstick. Approximate drain and refill capacity is 4.0 qts. (3.8L). |
| (3) | Quantity may vary by type of oil cooler and oil cooler lines. |
| (4) | Use an API energy conserving engine oil that is certified for gasoline engines. Recommended oil viscosity is 10W-30 (preferred) or 5W-30. |
| (5) | Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid. Capacity is not available from manufacturer. |
| (6) | Rear differential may be identified by full-floating axle shafts. |
| (7) | Models with Trac-Lok limited slip differential must have 5 ozs. (.15L) of Mopar® Trac-Lok friction modifier added if lubricant is changed. Fluid capacity includes friction modifier, if added. |
| (8) | Rear differential may be identified by number of bolts on rear cover. The 8 1/4" ring gear has 10 bolts on rear cover and 9 1/4" ring gear has 12 bolts on rear cover. |
FLUID CAPACITIES (RAM VAN & RAM WAGON)
