CAPACITIES
| Load Test (Amps) | (1) CCA Rating @ 0°F (Amps) | (2) Reserve Capacity (Min.) |
|---|
| 200 | 400 | 100 |
| 250 | 500 | 110 |
| 315 | 625 | 120 |
| 375 | 750 | 125 |
| (1) CCA rating is current a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2 volts or greater at specified temperature. (2) Reserve capacity is length of time a battery can deliver 25 amps and maintain a minimum terminal voltage of 10.5 volts at 80°F (27°C). |
| (1) | CCA rating is current a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2 volts or greater at specified temperature. |
| (2) | Reserve capacity is length of time a battery can deliver 25 amps and maintain a minimum terminal voltage of 10.5 volts at 80°F (27°C). |
FLUID CAPACITIES (AWD & FWD)
| Application | Specification |
|---|
| Cooling System (Includes Heater) |
| 2.5L | (1) 9.5 qts. (9.0L) |
| 3.0L & 3.3L | (1) 10.0 qts. (9.5L) |
| Crankcase (Includes Filter) | 4.5 qts. (4.3L) |
| Automatic Transaxle (Dexron-II) |
| A-413 (Except Fleet) | 8.9 qts. (8.4L) |
| A-413 (Fleet Only) | 9.2 qts. (8.7L) |
| A-413/A-670 Lock-Up | 8.5 qts. (8.0L) |
| A-604 Lock-Up | 9.1 qts. (8.6L) |
| Power Steering (Dexron-II) | 1.7 pts. (0.8L) |
| (1) Add 1 qt. (.95L) if equipped with rear heater. |
| (1) | Add 1 qt. (.95L) if equipped with rear heater. |
FLUID CAPACITIES (AWD & FWD)
FLUID CAPACITIES (RWD & 4WD)
| Application | Specification |
|---|
| Cooling System (Includes Heater) |
| Dakota |
| 2.5L | 9.8 qts. (9.3L) |
| 3.9L | 14.0 qts. (13.2L) |
| 5.2L | 14.3 qts. (13.5L) |
| All Others |
| 2.5L & 3.9 | 15.1 qts. (14.3L) |
| 5.2L (Except AW-150) | 17.0 qts. (16.1L) |
| 5.2L (AW-150) | 16.5 qts. (15.6L) |
| 5.9L (Except AW-150) | 15.5 qts. (14.7L) |
| 5.9L (AW-150) | 15.0 qts. (14.2L) |
| Crankcase (Includes Filter) | 4.5 qts. (4.3L) |
| Transfer Case |
| NP-205 (1) | 4.5 pts. (2.1L) |
| NP-231 (1) | 2.5 pts. (1.2L) |
| NP-241 (2) | 6.0 pts. (2.8L) |
| Rear Axle (SAE 80W-90/API GL-4) |
| Chrysler 7 1/4" | 3.0 pts. (1.4L) |
| Chrysler 8 1/4" | 4.4 pts. (2.1L) |
| Chrysler 9 1/4" | 4.5 pts. (2.1L) |
| Dana 60 | 6.0 pts. (2.8L) |
| Dana 70 | 7.0 pts. (3.3L) |
| Front Axle (SAE 80W-90/API GL-4) |
| Dakota | 2.6 pts. (1.2L) |
| All Others |
| Spicer 44FBJ | 5.6 pts. (2.6L) |
| Spicer 60F | 6.5 pts. (3.1L) |
| Automatic Transmission (Dexron-II) |
| A-500 (3.9L & 5.2L) | 5.2 qts. (4.4L) |
| A-518 (5.2L & 5.9L) | 10.2 qts. (9.6L) |
| A-727 (5.9L) | 8.4 qts. (7.9L) |
| A-998 (3.9L) | 8.6 qts. (8.1L) |
| A-999 (5.2L) | 8.6 qts. (8.1L) |
| Manual Transmission (SAE 5W-30 SG/API GL-4) |
| NP-435 (4-Speed) | 3.5 qts. (3.3L) |
| NP-2500 (5-Speed) | 2.0 qts. (1.9L) |
| Getrag 360 (5-speed) | 3.5 qts. (3.3L) |
| Power Steering (DOT-3 Grade) |
| Dakota RWD | 1.7 pts. (0.8L) |
| Dakota 4WD | 2.5 pts. (1.2L) |
| All Others | 2.7 pts. (1.3L) |
| (1) Recommended lubricant for the NP205 and NP231 is SAE 90W API GL-5 Multipurpose gear oil. (2) Recommended lubricant for the NP241 is Mopar ATF Plus, type 7176, or DexronIII. |
| (1) | Recommended lubricant for the NP205 and NP231 is SAE 90W API GL-5 Multipurpose gear oil. |
| (2) | Recommended lubricant for the NP241 is Mopar ATF Plus, type 7176, or DexronIII. |
FLUID CAPACITIES (RWD & 4WD)
