STANDARD PROCEDURE - LUBRICATION
There are no serviceable lubrication points on the front or rear suspension. The ball joints and tie rod ends are sealed for life and require no maintenance.
STANDARD PROCEDURE - OUTER TIE ROD END LUBRICATION
Note. View is typical.
Scheme 33
Note. If a new tie rod end is to be installed, make sure the boot (2) is properly lubricated.
Any time the outer tie rod end is disconnected from the knuckle, before assembly, clean all old grease and debris from the boot with a clean cloth and apply outer tie rod grease P/N 68088623AA (1) to the boot (2) as shown in illustration.