DIAGNOSIS
Note. Power window diagnostic procedures are not available. See WIRING DIAGRAMS to identify system circuits and repair faults.
Scheme 3
- Disconnect negative battery cable. Remove front door glass. Disconnect electrical connector. Remove nuts and regulator.
- Install window regulator with nuts. Tighten window regulator nuts to 8 N.m (71 INCH Lbs.). Connect electrical connector. Install front door glass. Connect negative battery cable.
Scheme 4
- Disconnect negative battery cable. Remove rear door glass. Disconnect electrical connector. Remove nuts and regulator.
- Install window regulator with nuts. Tighten window regulator nuts to 8 N.m (71 INCH Lbs.). Connect electrical connector. Install rear door glass. Connect negative battery cable.
Scheme 5
- Remove regulator handle. Remove rear door glass. Remove nuts and window regulator.
- Install window regulator with nuts. Tighten window regulator nuts to 8 N.m (71 INCH Lbs.). Install rear door glass. Install regulator handle.