WarningObserve the safety and cleanliness recommendations
Recommended tools
[1] trim removal tools (-).1350-ZZ
[2] plastic welding and rivet set repair kit (see equipment catalogue of the marques)
Stripping
Remove
- The number plate (before)
- The front bumper
- The headlamp washes (according to equipment)
Unclip the central trim (1) (as "a"); using tool [1]
Remove the trim (1)
NoteSymmetrical operations
Unclip: the lateral embellisher (2) (as "b"); using tool [1]
Remove the lateral trim (2)
NoteSymmetrical operations
Unclip: the side protective strip (3) (as "c"); using tool [1]
Remove the side protective strip (3)
Disconnect the connectors (as "d")
Remove the electric harness (4)
Unclip; remove the proximity sensors (5) (as "e"); using tool [1]
NoteSymmetrical operations
Unclip the front fog lamp trim (6) (as "f"); using tool [1]
Remove
- The front fog lamp trim (6)
- The front fog lamp
Unclip: the bumper central protector (7) (as "g"); using tool [1]
Remove: the bumper central protector (7)
Unclip: the access flap (8) (as "h"); using tool [1]
Remove: the access flap (8)
Level off: the grill support fixing points (9) (as "k")
Unclip: the bracket (front bumper upper grille (9)) (as "j"); using tool [1]
Remove: the bracket (front bumper upper grille (9))
Level off: the central grill fixing points (10) (as "l")
Unclip: the central grille (10) (as "m"); using tool [1]
Remove: the central grille (10)
Re-assembling
Trimming a front bumper cover (after repair)
WarningUse the plastic welding and rivet set repair kit [2] (see equipment catalogue of the marques)
Clean and prepare all the upper grill support fixing points (9) (as "n"); using tool [2]
Clean and prepare all the central grill support fixing points (10) (as "p"); using tool [2]
Fit: the upper grill support (9); clip (as "q")
Snap rivet: the grill support fixing points (9) (as "r"); using tool [2]
Fit: the central grille (10); clip (as "t")
Snap rivet: the central grill fixing points (10) (as "s"); using tool [2]
Trimming a front bumper outer (new)
WarningUse the plastic welding and rivet set repair kit [2] (see equipment catalogue of the marques)
Fit: the bracket (front bumper upper grille (9)); clip (as "u")
Snap rivet: the upper grill support fixing points (9) (as "v"); using tool [2].
Fit: the central grille (10); clip (as "x")
Snap rivet: the central grill fixing points (10) (as "t"); using tool [2]
Common operations
Carry out the re-trim operations in the reverse order to the stripping operations
Check the operation of the equipment