Identification
Engine type plate
- "a" approved prescribed type
- "b" engine reference mark
- "c" production serial number
Data
| engine code - DV6TED4 | ||
|---|---|---|
| particle filter | without | with |
| engine legislative type | 9HY | 9HZ |
| capacity (cc) | 1560 | |
| number of cylinders | 4 | |
| bore x stroke (mm) | 75 x 88,3 | |
| compression ratio | 18/1 | |
| max. power (E.E.C.) | 80 KW at 4000 revs/min | |
| max. power (DIN) | 110 hp at 4000 rpm | |
| maximum torque | 24 m.daN at 1750 rpm | |
| maximum torque (with temporary over-fulling) | 26,5 m.daN at 1750 rpm | |
| emission control standards | EURO 4 | EURO 3 |
| fuel | diesel | |
| catalytic converter | yes | |
| turbocharger | GARRET | |
| turbocharger pressure | 1 bar | |
| injection system | HDI direct injection system | |
| make | BOSCH | |
| type | EDC 16C34 | |
Cylinder head
Cylinder head gasket
Laminated metallic cylinder head gasket
Make FEDERAL MOGUL
"d" thickness identification mark
"e" engine identification
| piston protrusion (mm) | thickness (mm) | number of notches at "d" | number of notches at "e" |
|---|---|---|---|
| 0,685 to 0,734 | 1,35 | 1 | 3 |
| 0,533 to 0,634 | 1,25 | 2 | |
| 0,635 to 0,684 | 1,30 | 3 | |
| 0,735 to 0,784 | 1,40 | 4 | |
| 0,785 to 0,886 | 1,45 | 5 |
Cylinder head bolts
Bolt length under head X = 149 mm
Timing gear
(1) Induction camshaft
(2) exhaust camshaft
"f" area of marking