WarningObserve the safety and cleanliness instructions
Tooling
| tool | reference | description |
|---|---|---|
| [0194-C] | flywheel stop |
Removing
Lift and support the vehicle with the wheels free
Take down
- The RH front road wheel
- The engine undershield
- The RH front splash shield
- The protection cover from the ancillary drive belt (according to equipment)
- The ancillary drive belt
- The crankshaft pulley cover
NoteTurn the engine by means of the crankshaft pulley screw in the normal direction of rotation
Rotate the engine by means of the crankshaft pulley screw to bring it to the flywheel locking position
Lock the flywheel; using tool [0194-C]
Take down
- The bolt (2)
- The pulley (1)
Disconnect the connector (at "a")
WarningThe magnetic track should carry no sign of damage and should not be approached by any other magnetic source; otherwise, replace the crankshaft pulley
Take down
- The bolts (3) and (4)
- The engine speed sensor (5)
NoteMove aside: the protective timing cover (carefully)
Refitting
WarningAdhere to the tightening torques
Fit
- The engine speed sensor (5)
- The bolts (3) and (4)
- The pulley (1)
- The bolt (2)
Reconnect the connector (at "a")
Remove tool [0194-C]
Fit
- The crankshaft pulley cover
- The ancillary drive belt
- The ancillary drive pulley protective casing (according to equipment)
- The RH front splash shield
- The engine undershield
- The RH front road wheel
- The vehicle to its wheels
Controlled
Start the engine
Check the operation of the engine speed sensor (5); Using the diagnostic equipment