Home/Chrysler/Voyager/Chrysler Voyager IV (2000-2004)/Repair manual/Overhaul - 3.3L & 3.8L Engine/ENGINE BLOCK

Contents

Wiring diagrams Section: Overhaul - 3.3L & 3.8L Engine

STANDARD PROCEDURE - MEASURING BEARING CLEARANCE USING PLASTIGAGE

STANDARD PROCEDURE - FORM-IN-PLACE GASKETS AND SEALERS

STANDARD PROCEDURE - ENGINE GASKET SURFACE PREPARATION

STANDARD PROCEDURE - HYDROSTATIC LOCKED ENGINE

STANDARD PROCEDURE - REPAIR OF DAMAGED OR WORN THREADS

STANDARD PROCEDURE - ENGINE CORE AND OIL GALLERY PLUGS

COOLING SYSTEM TESTER METHOD

CLEANING

STANDARD PROCEDURE - REFACING VALVES AND VALVE SEATS

VALVE SEATS

VALVES

ENGINE BLOCK

CYLINDER BORE

OIL LEVEL TOO HIGH

OIL LEVEL TOO LOW

STANDARD PROCEDURE - FITTING CONNECTING RODS

STANDARD PROCEDURE - FITTING PISTONS

STANDARD PROCEDURE - MEASURING CONNECTING ROD BEARING CLEARANCE

STANDARD PROCEDURE - MAIN BEARING FITTING

CRANKSHAFT BEARING OIL CLEARANCE

PLASTIGAGE METHOD-ENGINE IN-VEHICLE

PLASTIGAGE METHOD-ENGINE OUT-OF-VEHICLE

STANDARD PROCEDURE - ENGINE OIL AND FILTER CHANGE

STANDARD PROCEDURE - ENGINE OIL LEVEL CHECK

STANDARD PROCEDURE - MANIFOLD STRIPPED THREAD REPAIR

STANDARD PROCEDURE - INTAKE MANIFOLD VACUUM PORT REPAIR

STANDARD PROCEDURE - VALVE TIMING VERIFICATION

STANDARD PROCEDURE - MEASURING TIMING CHAIN WEAR

All sections

ENGINE BLOCK Chrysler Voyager IV

Overhaul - 3.3L & 3.8L Engine

ENGINE BLOCK

Clean cylinder block thoroughly and check all core hole plugs for evidence of leaking.
If new core plugs are to be installed, (Refer to «STANDARD PROCEDURE - ENGINE CORE AND OIL GALLERY PLUGS»(ref-189922-S05876361302005091700000) ).
Examine block and cylinder bores for cracks or fractures.
Check block deck surfaces for flatness. Deck surface must be within service limit of 0.1 mm (0.004 in.).