3.8L
- Place a piece of cardboard in front radiator core, to keep from damaging the radiator. (Схема №28)
- Place starter on lower crossmember. (Схема №29)
- Connect the starter solenoid connector to starter. (Схема №30)
- Install dust shield on nose of starter, making sure of proper orientation. (Схема №31)
- Loose install the upper mounting bolt.
- Loose install the middle starter bolt. (Схема №32)
- Loosely install the lower starter bolt, then tighten 3 bolts to 47 N.m (35 ft. lbs.). (Схема №33)
- Install oil cooler bracket bolt and tighten. (Схема №34)
- Install fan module.
- Install fan module clip. (Схема №35)
- Connect and lock electrical connectors to fans.
- Install wiring clips. (Схема №36)
- Install battery connector to starter. (Схема №37)
- Tighten cable nut to 11.3 N.m (100 ins. lbs.). (Схема №38)
- Connect the electrical connector and lock connector to servo.
- Connect vacuum line to servo.
- Install servo to crossmember and tighten bolt. (Схема №39)
- Connect negative battery cable. (Схема №40)