Frame & Bumpers: Overview Chrysler Crossfire I

Scheme 1

Scheme 2

Scheme 3

Scheme 4

Scheme 5

Scheme 6

Scheme 7

1. Raise and support the vehicle.
2. Remove the lower splash shield retaining screws (1) and the lower splash shield (2). NOTE: Left side shown, right side similar.
3. Remove the left and right front fascia access panel retaining nuts and screws (1).
4. Remove access panels from the vehicle.
5. Disconnect the fog lamp wire harness connectors (1).
6. Disconnect the ambient air temperature sensor wire harness connector (2). NOTE: The front marker lamp harness connector can be reached through the access hole in the inner fender well.
7. Disconnect the front marker lamp wire harness connectors (1).
8. Remove the lower fascia retaining nuts (1).
9. Remove the left and right front fender to fascia retaining nuts and bolts. «(Refer to BODY/EXTERIOR/LEFT FRONT FENDER - REMOVAL)»(ref-250612-S30140262492007031500000) .
10. Lower the vehicle.
11. Remove the front grille assembly retaining bolts (1).
12. Remove the upper fascia retaining bolts (1).
13. Remove the fascia from the vehicle.