Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Driver Information Center Display Switch Screw | 2 N.m | 18 lb in |
| Electronic Control Unit Screw | 2 N.m | 18 lb in |
| Front End Inflatable Restraint Discriminating Sensor Bolt | 9 N.m | 80 lb in |
| Inflatable Restraint Sensing and Diagnostic Module (SDM) Bolt | 10 N.m | 89 lb in |
| Inflatable Restraint Side Impact Module Nut | 5 N.m | 44 lb in |
| Inflatable Restraint Side Impact Sensor Bolt | 10 N.m | 89 lb in |
| Inflatable Restraint Steering Wheel Module Coil | 2.5 N.m | 22 lb in |
| Instrument Panel Compartment Screw | 2 N.m | 18 lb in |
| Instrument Panel Inflatable Restraint Module | 10 N.m | 89 lb in |
| Seat Belt Guide Loop Nut | 42 N.m | 31 lb ft |
| Seat Belt Retractor Bolt | 42 N.m | 31 lb ft |
| Steering Column Lower Shroud Bolt | 1.5 N.m | 13 lb in |
| Steering Column Upper Shroud Bolt | 3.5 N.m | 31 lb in |
| Steering Wheel Nut | 40 N.m | 30 lb ft |
| This is a prevailing torque type fastener. This fastener may be reused ONLY if: The fastener and its counterpart are clean and free from rust. The fastener develops a specified amount of torque (drag) against its counterpart prior to the fastener seating. If the fastener does not meet these criteria, REPLACE the fastener. | ||
Fastener Tightening Specifications