Home ReviewsRefund
Home/Chevrolet/SSR/Chevrolet SSR I (2003-2006)/Repair manual/Mechanical/Installation Procedure
Contents Wiring diagrams Section: Mechanical All sections

Installation Procedure Chevrolet SSR I

Mechanical ~113 words
  1. Lubricate the oil filter seal with clean engine oil.
  2. Install the oil filter. Tighten: Tighten the oil filter to 30 N.m (22 lb ft).
  3. Install the oil drain plug to the oil pan. Tighten: Tighten the oil pan drain plug to 25 N.m (18 lb ft).
  4. Lower the vehicle.
  5. Fill the crankcase with the proper quantity and grade of engine oil. Refer to «Capacities - Approximate Fluid»(ref-187835-S41718988712005090100000) and «Fluid and Lubricant Recommendations»(ref-187835-S13931581072005090100000) in Maintenance and Lubrication.
  6. Remove the oil level indicator.
  7. Wipe the indicator with a clean cloth.
  8. Install the oil level indicator.
  9. Remove the oil level indicator in order to check the level.
  10. Add oil if necessary.
  11. Close the hood.