Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Bumper to Brace Bolts | 55 N.m | 41 lb ft |
| Front Bumper to Bracket Bolts | 85 N.m | 63 lb ft |
| Rear Bumper Plate Assembly Nuts | 90 N.m | 66 lb ft |
| Rear Frame Rail Bracket Bumper Bolts | 100 N.m | 74 lb ft |
| Side Frame Rail Bracket Bolt | 40 N.m | 30 lb ft |
Fastener Tightening Specifications
Scheme 1
- Raise the vehicle.
- Disconnect the fog lamp electrical connectors, if equipped.
- Remove the fog lamps, if equipped. Refer to «FOG LAMP REPLACEMENT - FRONT»(ref-176693-S40447907702005051000000) .
- Loosen the center studs of the push-pins on the air deflector with a flat-bladed screwdriver.
- Remove the air deflector from the front bumper fascia.