TORQUE CONVERTER
Note. The torque converter is a sealed unit and must be serviced as a complete unit. Torque converter and transaxle cooler must be thoroughly cleaned and flushed if transaxle is contaminated.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Differential Final Gear Bolts | 59-66 (80-89) | |
| Drain Plug | 14-17 (19-23) | |
| Drive Plate-To-Converter Bolts | 13-14 (18-19) | |
| LH Engine Mount Bracket | 37-43 (50-60) | |
| Oil Pipe Union Bolts | 15-17 (20-23) | |
| Oil Pump Bolts | 13-20 (18-27) | |
| Rear Cover Bolts | 12-17 (16-23) | |
| Rear Cover Nuts | 8-11 (11-15) | |
| Reduction Driven Gear Nuts | 80-108 (110-150) | |
| Selector Housing Nut | 8-12 (10-16) | |
| Selector Lever Shaft Nut | 13-16 (18-22) | |
| Shift Shaft Nuts | 20-24 (27-33) | |
| Transmission Case Housing Bolts | 12-17 (16-23) | |
| Transmission Range (TR) Switch Bolt | 10-17 (13-23) | |
| INCH Lbs. (N.m) | ||
| Lower Valve Body Bolts | 72-102 (8.1-11.5) | |
| Lower Valve Body Cover Bolts | 36-48 (4.1-5.4) | |
| Manual Detent Spring Bolt & Nut | 72-102 (8.1-11.5) | |
| Oil Cooler Hose Clamps | 12 (1.5) | |
| Oil Filler Tube Bolt | 36-60 (4.1-6.8) | |
| Oil Pan Bolts | 36-48 (4.1-5.4) | |
| Oil Pipe Plate Bolts | ||
| 6-mm | 36-60 (4.1-6.8) | |
| 8-mm | 89-144 (10.1-16.3) | |
| Oil Pump Cover Bolts | 72-102 (8.1-11.5) | |
| Oil Strainer Bolts | 44-53 (5-6) | |
| Shift Solenoid Bolts | 66-78 (7.5-8.8) | |
| Speed Sensor Bolt | 66-78 (7.5-8.8) | |
| Throttle Valve Cam Bolt | 54-78 (6.1-8.8) | |
| Transmission Case Plug | 54-78 (6.1-8.8) | |
| Upper Valve Body Bolts | 44-53 (5-6) | |
| 2nd Brake Band Cover Bolts | 66-78 (7.5-8.8) | |
TORQUE SPECIFICATIONS
TRANSMISSION SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Clutch Pack Clearance | ||
| Direct Clutch | .098-.120 (2.49-3.05) | |
| Forward Clutch | .079-.106 (2.01-2.69) | |
| 1st & Reverse Brake | .023-.075 (.58-1.91) | |
| Differential Gear Thrust Play | .002-.013 (.05-.33) | |
| Input Shaft Thrust Play | .012-.035 (.30-.89) | |
| 2nd Brake Piston Rod Stroke | .060-.120 (1.52-3.05) | |
TRANSMISSION SPECIFICATIONS