CODE 67, A/C PRESSURE SENSOR
PCM determines when A/C clutch is engaged by monitoring A/C status line. If A/C pressure does not increase by at least 4 psi when A/C clutch is turned on, Code 67 will set.
Note. Test numbers refer to numbers on diagnostic chart.
- Code 67 will set if PCM does not detect an A/C pressure change when A/C clutch has been cycled.
- If relay power feed is intermittent, A/C clutch status terminal may not detect voltage when A/C is commanded on.
- Check A/C electrical harness for problems. If A/C clutch status line becomes intermittently open or shorted while compressor is on, PCM will be wrongly detecting A/C clutch going on and off. When this occurs and clutch remains engaged, PCM will not detect pressure change and a Code 67 will be set.
- If A/C compressor clutch status circuit is intermittently open or shorted while compressor is on, PCM will wrongly detect compressor cycling on and off, but PCM will detect no pressure change and a Code 67 will set.
A Code 67 will store in PCM memory but will not turn on the SERVICE ENGINE SOON light. An A/C system low on charge could cause a Code 67 to set.