Home ReviewsRefund
Home/Chevrolet/Blazer/Chevrolet Blazer S15 (1994-1998)/Repair manual/Mechanical/Cooling System Bleeding
Contents Wiring diagrams Section: Mechanical All sections

Cooling System Bleeding Chevrolet Blazer S15

Mechanical
  1. Fill radiator to base of filler neck. Start engine. Place A/C-heater control in any position except MAX. Select highest temperature setting. Idle engine until lower radiator hose is hot.
  2. Increase engine speed to 3000 RPM and then back to idle. Do this 5 times to expel any air trapped in system. Fill radiator as necessary. Install radiator cap. Allow engine to cool. Fill coolant recovery reservoir as necessary.
  3. Crush and add 2 Coolant Sealant Pellets (GM P/N 3634621) or equivalent to radiator (if reservoir is not pressurized) or coolant reservoir (if reservoir is pressurized).

More articles — Engine Mechanical 4.3L V6 - VIN W & ,X