Home ReviewsRefund
Home/Cadillac/SRX/Cadillac SRX II facelift (2012-2016)/Repair manual/Cooling System (Mechanical)/Engine Cooling System: Specifications
Contents Wiring diagrams Section: Cooling System (Mechanical) All sections

Engine Cooling System: Specifications Cadillac SRX II facelift

Cooling System (Mechanical) 2 illustrations

Fastener Tightening Specifications

ApplicationSpecification
MetricEnglish
Cooling Fan Shroud to Radiator Bolt8 N.m71 lb in
Engine Coolant Air Bleed Pipe Bolt10 N.m89 lb in
Engine Coolant Fan Motor Bolt7 N.m62 lb in
Engine Coolant Fan Resistor Bolt5.4 N.m48 lb in
Radiator Support Bracket Bolt9 N.m80 lb in
Thermostat Bolt10 N.m89 lb in
Thermostat Housing Bolt10 N.m89 lb in
Water Outlet Housing Bolt10 N.m89 lb in
Water Pump Bolt*
First Pass10 N.m89 lb in
Second Pass10 N.m89 lb in
Final PassPlus 45 Degrees
Water Pump Pulley Bolt10 N.m89 lb in
* Use NEW fastener.

Fastener Tightening Specifications

Scheme 1

Scheme 1: Cooling Fan
Scheme 1: Cooling Fan

Scheme 2

Scheme 2: Coolant Level Switch (UKD)
Scheme 2: Coolant Level Switch (UKD)

More articles — Engine Cooling System