Intermittent
Electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections
Reference Information
Schematic Reference
Cigar Lighter/Power Outlet Schematics
Connector End View Reference
COMPONENT CONNECTOR END VIEWS - INDEX
Description and Operation
Power Outlets Description and Operation
Electrical Information Reference
- «Circuit Testing»(ref-644726-S12298670162014072300000)
- «Connector Repairs»(ref-644726-S09053351542014072300000)
- «Testing for Intermittent Conditions and Poor Connections»(ref-644726-S21103124652014072300000)
- «Wiring Repairs»(ref-644726-S20665353652014072300000)
Circuit/System Verification
- Ignition ON, connect an appropriate device to the X80 Accessory Power Receptacle.
- Verify the device is powered by the appropriate X80 Accessory Power Receptacle listed below. X80A Accessory Power Receptacle - Console Center Console 1 X80B Accessory Power Receptacle - Console Center Console 2 X80D Accessory Power Receptacle - Console Center Compartment X80G Accessory Power Receptacle - Instrument Panel If the device is not powered Refer to «X80A, X80B, X80D, X80G Accessory Power Receptacle»(ref-644779-S35744599552014072300000) in Circuit/System Testing. If the device is powered
- Verify the device is powered by the X80C Accessory Power Receptacle-Cargo. If the device is not powered Refer to «X80C Accessory Power Receptacle»(ref-644779-S35744599552014072300000) in Circuit/System Testing If the device is powered
- All OK.
Repair Instructions
Perform the Diagnostic Repair Verification after completing the repair.
Accessory Power Receptacle Replacement .