- Remove front cover. See «FRONT COVER»(ref-54836-S17136334422001011700000) under REMOVAL & INSTALLATION. Remove 3 oil pump mounting bolts. Remove pump and drive gear. (Схема №15)
- Remove drive spacer from pump housing. Remove 2 screws holding pump halves together. Remove inner (drive) and outer (driven) rotors from housing and mark for reassembly. Remove pressure relief valve. (Схема №16)
Inspection
Inspect pump housing for nicks, burrs, chips or debris that might cause a leak or binding in rotor pocket. Inspect drive and driven rotors for nicks or burns. Check pump cover and interior surface for excessive wear or score marks. Check for flatness.