Approximate Fluid Capacities
The following approximate capacities are given in US English and metric conversions. See Fluid and Lubricant Recommendations for more information. All capacities are approximate. When adding, be sure to fill to the approximate level as recommended in this manual. Recheck fluid level after filling.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Cooling System | ||
| 2.4L L4 Engine | 9.6 liters | 10.1 quarts |
| 3.6L V6 Engine | 7.1 liters | 7.5 quarts |
| Engine Oil with Filter | ||
| 2.4L L4 Engine | 4.7 liters | 5.0 quarts |
| 3.6L V6 Engine | 5.7 liters | 6.0 quarts |
| Fuel Tank | ||
| 2.4L L4 Engine | 60.0 liters | 15.8 gallons |
| 3.6L V6 Engine AWD | 74.0 liters | 19.5 gallons |
| 3.6L V6 Engine FWD | 70.5 liters | 18.6 gallons |
| Transmission Fluid (Drain and Refill) | ||
| 2.4L L4 Engine, 6-Speed Automatic | 5.0 liters | 5.3 quarts |
| 3.6L V6 Engine, 6-Speed Automatic | 5.0 liters | 5.3 quarts |
| Wheel Nut Torque | 150 N.m | 110 lb ft |
Approximate Fluid Capacities
Fluid and Lubricant Recommendations
| Usage | Fluid/Lubricant |
|---|---|
| Engine Oil | The engine requires engine oil approved to the dexos™ specification. Oils meeting this specification can be identified with the dexos™ certification mark. Look for and use only an engine oil that displays the dexos™ certification mark of the proper viscosity grade. SAE 5W-30 GM P/N 19293000 (Canadian P/N 19286321) is the best viscosity grade for the vehicle. Do not use other viscosity oils. |
| Engine Coolant | 50/50 mixture of clean, drinkable water and use only DEX-COOL Coolant GM P/N 12346290 (Canadian P/N 10953464) |
| Hydraulic Brake System | DOT 3 Hydraulic Brake Fluid GM P/N 88862806 (Canadian P/N 88863462) |
| Windshield Washer | Optikleen® Washer Solvent |
| Hydraulic Power Steering System | DEXRON®-VI Automatic Transmission Fluid GM P/N 88861003 (Canadian P/N 88861004) |
| Automatic Transmission | DEXRON®-VI GM P/N 88861003 (Canadian P/N 88861004) |
| Key Lock Cylinders | Multi-Purpose Lubricant, Superlube GM P/N 12346241 (Canadian P/N 10953474) |
| Hood Latch Assembly, Secondary Latch, Pivots, Spring Anchor, and Release Pawl | Lubriplate Lubricant Aerosol GM P/N 89021668 (Canadian P/N 89021674) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB |
| Hood and Door Hinges | Multi-Purpose Lubricant, Superlube GM P/N 12346241 (Canadian P/N 10953474) |
| Weatherstrip Conditioning | Weatherstrip Lubricant GM P/N 3634770 (Canadian P/N 10953518) or Dielectric Silicone Grease GM P/N 12345579 (Canadian P/N 10953481) |
Fluid and Lubricant Recommendations
Maintenance Items
The Normal Maintenance Replacement Parts information will only be found in the Owner's Manual. Refer to the Maintenance Schedule subsection of the Owner's Manual.
You may be able to use the Search information function using the words Replacement Parts.
Maintenance Schedule (North American Emissions)
The Maintenance Schedule information will only be found in the Owner's Manual.
Refer to the Maintenance Schedule subsection of the Owner's Manual, or you may be able to use the Search information function using the words Scheduled Maintenance.
GM Oil Life System Resetting
When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A CHANGE ENGINE OIL message or light will come on. Change the engine oil as soon as possible within the next 600 miles (1 000 km). It is possible that, if driving under the best conditions, the oil life system may not indicate that an oil change is necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset.
If the system is ever reset accidentally, change the engine oil at 3, 000 miles (5 000 km) since last oil change.
How to Reset the Engine Oil Life System
Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the system
- Turn the ignition to ON/RUN with the engine off.
- Press the DIC menu button on the turn signal lever to scroll through the menu items on the DIC screen.
- Press the set button to clear the CHANGE ENGINE OIL SOON message and/or restore the REMAINING OIL LIFE 100% message.
- Turn the ignition to LOCK/OFF.
The system is reset when the CHANGE ENGINE OIL SOON message is off and the REMAINING OIL LIFE 100% message is displayed.
If the CHANGE ENGINE OIL message comes back on when the vehicle is started, the engine oil life system has not been reset. Repeat the procedure.
See also:
• Fluid and Lubricant Recommendations