Home ReviewsRefund
Home/Buick/Century/Buick Century VI (1997-2005)/Repair manual/Automatic Transaxle Servicing/PARK/NEUTRAL POSITION SWITCH
Contents Wiring diagrams Section: Automatic Transaxle Servicing All sections

PARK/NEUTRAL POSITION SWITCH Buick Century VI

Automatic Transaxle Servicing 2 illustrations ~105 words

PARK/NEUTRAL POSITION SWITCH

  1. If a new Park/Neutral Position (PNP) switch has been rotated and the pin is broken or if using an old PNP switch, adjust the PNP switch. Place the shift shaft in the Neutral position.
  2. Install the PNP switch to the mounting boss. (Scheme 203) Assemble the PNP switch mounting bolts loosely.
  3. Use the Park/Neutral Switch Alignment Tool (J-41545) to align the flats of the shift shaft to the flats (1 and 2) on the PNP switch. (Scheme 204)
  4. Install the PNP switch mounting bolts. Tighten the PNP switch mounting bolts to specification. See «TORQUE SPECIFICATIONS»(/buick/century/vi-1997-2005/remont/automatic-trans/#automatic-transaxle-servicing__torque-specifications).

Scheme 203

Scheme 203
Scheme 203

Scheme 204

Scheme 204
Scheme 204