STARTER SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Axial Armature Play | .1-.2 mm | |
| Brush Length | 13 mm (minimum) | |
| Testing Voltage | 11.7-12.3 Volts | |
| Rated Power | ||
| M50, M52, S52 | 1.7 kW | |
| M51 | 2.2 kW | |
| M60, M62 | 1.7 kW | |
| M70, M73 | 2.2 kW | |
| M57 | 2.2 kW | |
| M67 | 2.6 kW | |
| S62 | 1.7 kW | |
| Current Consumption At Terminal 50 (Rated Power Of 1.4 kW) | ||
| Pull-In Winding | 54.5 A | |
| Hold-In Winding | 10.5 A | |
| Current Consumption At Terminal 50 (Rated Power Of 1.7 kW with Intermediate Transmission) | ||
| Pull-In Winding | 51 A | |
| Hold-In Winding | 9.5 A | |
| Current Consumption At Terminal 50 (Rated Power Of 1.8 kW) | ||
| Pull-In Winding | 50 A | |
| Hold-In Winding | 12 A | |
| Current Consumption At Terminal 50 (Rated Power Of 2.0 kW) | ||
| Pull-In Winding | 54.5 A | |
| Hold-In Winding | 10.5 A | |
| Current Consumption At Terminal 50 (Rated Power Of 2.2 kW) | ||
| Pull-In Winding | 58 A | |
| Hold-In Winding | 13 A | |
| Current Consumption At Terminal 50 (Rated Power Of 2.2 kW with Intermediate Transmission) | ||
| Pull-In Winding | 60 A | |
| Hold-In Winding | 10 A | |
| Current Consumption At Terminal 50 (Rated Power Of 2.6 kW with Intermediate Transmission) | ||
| Pull-In Winding | 50 A | |
| Hold-In Winding | 12 A | |
STARTER SPECIFICATIONS
TORQUE SPECIFICATIONS
| Type | Thread | Measure | |
|---|---|---|---|
| Starter motor mounting to transmission bell housing | All, except N51, N52, N52K, N53, N54 | 45 Nm | |
| Support to starter | All | M5 | 5 Nm |
| Support to crankcase | All | 47 Nm | |
| Electrical leads to starter | |||
| All | M5 | 5 Nm | |
| All | M6 | 7 Nm | |
| All | M8 | 13 Nm | |
| Bolt connection, pole tube | All | M6 | 6 Nm |
| Heat shield to starter motor | M6 | 6 Nm | |
STARTER AND MOUNTING PARTS