12 1 080 Repair kit
Minimum set: Mechanical tools
Note. For fitting spark plug connectors to ignition lead
Series: E36, E38
Storage location: K 103
SI number: 1 03 89 (037)
Order number: 12 1 080
Repair kit
Consisting of
1 = 12 1 081 Pliers
3 = 12 1 083 Matrix set
Note. Cable 4 mm 2 /ignition cable
6=12 1 086 Mounting sleeve
Scheme 132
12 1 120 Lever
Note. Note: For unlocking edge connector on fuel injectors
Engine: S54
SI number: 1 15 00(609)
Order number: 12 1 120
Lever
Scheme 133
12 6 050 Switching unit
Minimum set: Measuring and testing equipment
In conjunction with
12 6 411
Note: For activating solenoid valves in VANOS unit
Engine: S54, S62
Storage location: F 116
SI number: 1 01 99(416)
Order number: 12 6 050
Switching unit
Scheme 134
12 6 410 Adapter lead and switching unit
Minimum set: Measuring and testing equipment
Note. Note: For external operation of VANOS adjustment unit during assembly and for checking function of 4/2-way valve
Engine: M50, M52, S50B32, S54, S62
Storage location: F 111, F 115
SI number: 1 08 92(555)
Order number: 12 6 410
Adapter lead and switching unit
Consisting of
12 6 411 Adapter lead with diode
Note. For non-interchangeable connection to a 12 volt power source, engine: M50, M52, S62, S54
12 6 412 Switching unit with cable connection
Note. Engine: S50B32
12 6 413 Polarity reversal protector
Note. Retrofit kit with polarity reversal protection diode for installation in adapter lead 12 6 411 for the purpose of adapting it to the power ratings of the switching unit 12 6 050.Identification: Red shrink-fit sleeve
Scheme 135
12 7 050 Adapter lead
Minimum set: Measuring and testing equipment
Note. Note: For engines with rod-type ignition coils for measuring secondary voltage
Engine: M54, M56, N40, N42, N46, N62, N73, S54
Storage location: F 104
SI number: 2 01 01(671)
Order number: 12 7 050
Adapter lead
Scheme 136
12 7 060 Anti-static mat (ESD)
Note. Note: ESD (Electro Static Discharge) For protection against ESD during repairs to electronic components. (Replaces the sub-number 12 7 192 from EPROM tool kit 12 7 190)
Series: E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, R50, R52, R53, RR1
SI number: 2 06 04(128)
Order number: 12 7 060
Antistatic mat (ESD)
Scheme 137
12 7 121 Counterholder wrench
| In conjunction with | Socket |
|---|---|
| Note | Alternator N42 engine |
| Order number | 12 7 121 |
| Counterholder wrench |
COUNTERHOLDER WRENCH
12 7 122 Socket
| In conjunction with | Counterholder wrench |
|---|---|
| Note | Hazet 8808 lg 10 |
| SI number | 1 28 03(051) |
| Order number | 12 7 122 |
| Socket |
SOCKET
12 7 190 EPROM tools/ID marking
| Storage location | J 101 |
|---|---|
| Order number | 12 7 190 |
| EPROM tools/ID marking | |
| Consisting of | |
| 1 = 12 7 191 | EPROM extractor pliers |
| 2 = 12 7 192 | Antistatic mat |
| NOTE: incl. arm band | |
| NOTE |
|---|
| Incl. arm band |
EPROM TOOLS/ID MARKING
12 7 200 Set of tools
| Note | For opening & closing control unit box |
|---|---|
| Storage location | J 106 |
| Order number | 12 7 200 |
| Set of tools | |
| Consisting of | |
| 1 = 12 7 201 | Pliers |
| NOTE: For bending open tab washers | |
| 2 = 12 7 202 | Lever |
| NOTE: For bending tab washers | |
| 3 = 12 7 203 | Pliers |
| NOTE: For closing tab washers | |
| 4 = 12 7 204 | Torx socket T20 |
| 5 = 12 7 205 | Torx socket T10 |
| 6 = 12 7 206 | Fine pen |
| NOTE: Black, waterproof | |
| 8 = 12 7 208 | Slotted screwdriver 2 mm |
| 9 = 12 7 209 | Straightening tool |
| NOTE: For EPROM connections |
| NOTE |
|---|
| For bending open tab washers |
| NOTE |
|---|
| For bending tab washers |
| NOTE |
|---|
| For closing tab washers |
| NOTE |
|---|
| Black, waterproof |
| NOTE |
|---|
| For EPROM connections |
SET OF TOOLS
12 7 210 Control unit seal
| Storage location | J 106 |
|---|---|
| Order number | 12 7 210 |
| Control unit seal | |
| Consisting of | |
| 1 = 12 7 211 | Seal marks |
| 2 = 12 7 212 | Hole punch |
| NOTE: For seal mark dating | |
| NOTE |
|---|
| For seal mark dating |
CONTROL UNIT SEAL