00 0 010 Special Tool Board I
Order number: 00 0 010
Special tool board I
00 0 020 Special Tool Board II Complete
In conjunction with: 00 0 230 This board can be used in a min. 4 m long moving special tool cabinet.
Note: Size 2 m x 1 m
Series: All models
Storage location: Tool cabinet
Order number: 00 0 020
Special tool board II complete
Scheme 56
00 0 030 Special Tool Board III Complete
In conjunction with: 00 0 230 This board can be used in a min. 4 m long moving special tool cabinet.
Note: Size 2 m x 1 m
Series: All models
Storage location: Tool cabinet
Order number: 00 0 030
Special tool board III complete
Scheme 57
00 0 040 Special Tool Board IV Complete
In conjunction with: 00 0 230 This board can be used in a min. 4 m long moving special tool cabinet.
Note: Size 2 m x 1 m
Series: All models
Storage location: Tool cabinet
Order number: 00 0 040
Special tool board IV complete
Consisting of
3 = 00 0 043 Hook set for films 10, 11 and 12
4 = 00 0 044 Film 10 (left)
Note: For fields A/B/C 25 ... 27
5 = 00 0 045 Film 11 (center)
Note: For fields A/B/C 27/28 and 29/30
6 = 00 0 046 Film 12 (right)
Note: For fields A/B/C 30 ... 32
Scheme 58
00 0 050 Caption Board: "SPECIAL TOOLS"
Note: With film sheet in the desired language - size 2000 mm x 215 mm
Storage location: Tool cabinet
Order number: 00 0 050
Caption board: "SPECIAL TOOLS"
Scheme 59
00 0 051 Film Sheet, German
Order number: 00 0 051
Film sheet, German
00 0 052 Film Sheet, English
Order number: 00 0 052
Film sheet, English
00 0 053 Film Sheet, French
Order number: 00 0 053
Film sheet, French
00 0 054 Film Sheet, Dutch
Order number: 00 0 054
Film sheet, Dutch
00 0 055 Film Sheet, Italian
Order number: 00 0 055
Film sheet, Italian
00 0 056 Film Sheet, Spanish
Order number: 00 0 056
Film sheet, Spanish
00 0 059 Caption Board Without Film
Order number: 00 0 059
Caption board without film
00 0 060 Special Tool Board V Complete
In conjunction with: 00 0 230 This board can be used in a min. 4 m long moving special tool cabinet.
Note: Size 2 m x 1 m
Series: All models
Storage location: Tool cabinet
Order number: 00 0 060
Special tool board V complete
Consisting of
3 = 00 0 063 Hook set for films 13, 14 and 15
4 = 00 0 064 Film 13 (left)
Note: For fields A/B/C 33 ... 35
5 = 00 0 065 Film 14 (center)
Note: For fields A/B/C 35/36 and 37/38
6 = 00 0 066 Film 15 (right)
Note: For fields A/B/C 38 ... 40
7 = 00 0 224 Large special tool board 2 m x 1 m
Note: This special tool board serves as the back panel of basic and mounting frames and is the basis for large fixed and moving special tool boards.
In conjunction with: Hook set and films
Scheme 60
00 0 070 Special Tool Cabinet, Length 6 m
Note: For accommodating large or small moving special tool boards (not contained in scope of delivery) for the entire current range of special tools. Consisting of: 1x 00 0 220 complete plus 2x 00 0 221 and 2x 00 0 224
Series: All models
Order number: 00 0 070
Special tool cabinet, length 6 m
00 0 080 Folding Index
Note: Summary of tool positioning/storage locations
Storage location: Tool cabinet
SI number: 1 12 97 (202)
Order number: 00 0 080
Folding index
Scheme 61
00 0 110 Cardboard Box
Minimum set: Measuring and testing equipment
Note: As storage location "Y3" for MINI V-adapter leads (with launch of R56)
SI number: 2 09 06 313
Order number: 00 0 110
Cardboard box
Scheme 62
00 0 120 Cardboard Box (Set) For Cable Cabinet
Note: For storing adapter cables (cable cabinet reconditioning) 2 cardboard boxes are supplied at present: 00 0 121 = storage location Y1 00 0 122 = storage location Y2
SI number: 00 04 04 (104)
Order number: 00 0 120
Cardboard box (set) for cable cabinet
Consisting of
1 = 00 0 121 Cardboard box Y1
Note: = storage location for adapter cables
2 = 00 0 122 Cardboard box Y2
Note: = storage location for adapter cables
00 0 130 Special Tool Board VI Complete
In conjunction with: 00 0 230 This board can be used in a min. 4 m long moving special tool cabinet.
Note: Storage board for older tools
Series: All models
Order number: 00 0 130
Special tool board VI complete
Scheme 63
00 0 140 Supplementary Hook Set
Note: Only for delivery of the supplementary hook set for converting tool boards (old to new), see also 00 8 600 HOOK SET
Order number: 00 0 140
Supplementary hook set
00 0 150 Special Tool Cabinet
Note: To accommodate 5 special tool boards. Replaced by 1x 00 0 220 complete plus 1x 00 0 221 and 1x 00 0 224
Order number: 00 0 150
Special tool cabinet
Scheme 64
00 0 152 Shelf
Order number: 00 0 152
Shelf
00 0 153 Wide-Groove Mat (2 Mats)
Order number: 00 0 153
Wide-groove mat (2 mats)
00 0 154 Drawer Unit With 5 Drawers, Lockable
Order number: 00 0 154
Drawer unit with 5 drawers, lockable
00 0 155 Rear Panel
Order number: 00 0 155
Rear panel
00 0 158 Lockable Roller Shutter (2)
Order number: 00 0 158
Lockable roller shutter (2)
00 0 170 Parts Cabinet
Note: For storing removed vehicle parts
Series: All models
Storage location: Single
SI number: 8 01 94(821)
Order number: 00 0 170
Parts cabinet
Scheme 65
00 0 180 Cable Cabinet II, Complete
Note: For extended accommodation of adapter leads as well as measuring and test equipment
SI number: 0 02 99 (399)
Order number: 00 0 180
Cable cabinet II, complete
Consisting of
1 = 00 0 182 Film set II
Note: For identifying storage locations in cable cabinet II - Currently applicable status
2 = 00 0 183 Cable holder set - H
Note: For cable cabinet II only 16 guide rails each with 15 straps for holding adapter cables - Currently applicable status
3 = 00 0 184 CD holder
Note: For holding two program CDs with sleeve - Can be fitted in cable cabinets I and II
4 = 00 0 186 Drawer block
Note: For cable cabinet II only
5 = 00 0 187 Holder set for test adapters
Note: For cable cabinet II only
6 = 00 0 188 Strap set (optional)
Note: 20 straps for cable holders - H - For expanding suspended cables in cable cabinets I and II
Scheme 66
00 0 190 Cable Cabinet I, Complete
Note: With set of films and accessories - For storing adapter cables as well as measuring devices and testers
SI number: 0 02 99 (399)
Order number: 00 0 190
Cable cabinet I, complete
Consisting of
1 = 00 0 191 Cable cabinet
Note: Without contents or accessories Basis for cable cabinets I and II
2 = 00 0 192 Set of films I
Note: For identifying storage locations in cable cabinet I - valid status in each case
3 = 00 0 193 Cable holder set - H
Note: For cable cabinet I only 24 guide rails each with 15 retaining straps for accommodating adapter leads
4 = 00 0 194 Cable carrier - B
Note: For accommodating engine test leads For extending cable suspensions in cable cabinets I and II
6 = 00 0 195 Swivel board frame
Note: Carrier of cable suspensions in cable cabinets I and II
7 = 00 0 196 Drawer block
Note: For cable cabinet I only
8 = 00 0 197 Magnet with roller
Note: For improved location and spacing of swivel boards - For retrofitting in cable cabinets I and II only
9 = 00 0 198 Compartment floor
Note: For cable cabinet I only
10 = 00 0 199 Index
Note: For finding BMW special tools for automotive electrics in cable cabinets I and II
Scheme 67
00 0 200 Cross Member
Minimum set: Mechanical tools
Note: To hold the engine when removing and installing the front axle support, the oil sump and the transmission
Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45, N46, N52, N54, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, S85, W10, W11, W17
Storage location: Single
SI number: 1 14 01 (766)
Order number: 00 0 200
Cross member
Consisting of
1 = 00 0 201 Locating bridge
2 = 00 0 202 Spindle with hook
3 = 00 0 203 Extension
Note: For extending locating bridge 00 0 201 Model series: E65
4 = 00 0 204 Adapter support (2 x)
In conjunction with: 00 0 200
5 = 00 0 205 Extension
Note: Model series: R50, R53
6 = 00 0 206 Support foot (2 x)
Note: Model series: E30, E31, E32, E34, E36, Z3 6-cylinder engines only
7 = 00 0 207 Support foot (2 x)
Note: Model: Z3 / 4-cylinder engines only
8 = 00 0 208 Support foot (2 x) with rests (4 x)
Note: Model series: E38, E39, E46, E60, E65
9 = 00 0 209 Chain with hook
Note: Version as 11 0 003
10 = 00 0 451 Profile strip
Scheme 68
Note: Model series: E85
11 = 00 0 452 Supports (2 x)
Note: Model series: E70
In conjunction with: 00 0 208
00 0 210 Conversion Kit
Note: For cable cabinet
Series: All models
Storage location: Cable cabinet
SI number: 0 02 99 (399)
Order number: 00 0 210
Conversion kit
Scheme 69
00 0 220 Special Tool Cabinet, Length 2 m
Note: Dimensions: (LxHxD) 2.05 m x 2.10 m x 0.65 m For extended accommodation of special tools. IMPORTANT! Use Order No. 00 1 000 to erect a complete 6 m long special tool cabinet.
SI number: 0 01 00 (549)
Order number: 00 0 220
Special tool cabinet, length 2 m
Consisting of
1 = 00 0 221 Frame with roller shutter
Note: Basic frame for erecting a separate 2 m long special tool cabinet. NOTE: If ordered individually as a mounting frame, the complete scope of delivery must already be present under Order No. 00 0 220. Overall length with a mounting frame: 4 m
In conjunction with: 00 0 225 / Not available without roller shutter for stability reasons!
2 = 00 0 222 Side panel, left
Note: Required only once for erecting the basic frame
3 = 00 0 223 Side panel, right
Note: Required only once for erecting the basic frame
4 = 00 0 224 Large special tool board 2 m x 1 m
Note: This special tool board serves as the rear panel of basic and mounting frames and is the basis for large stationary and moving special tool boards.
In conjunction with: Hook set and films
5 = 00 0 225 Roller shutter, lockable
Note: Included in scope of delivery 00 0 221. This order number is for reordering purposes only.
6 = 00 0 226 Side frame
Note: Required only once for setting up the basic frame
Scheme 70
00 0 230 Large Board (2x1 m) With Set Of Castors
In conjunction with: Special tool boards, complete
Note: For retrofitting to a large special tool board for use in a special tool cabinet with a minimum length of 4 m.
Order number: 00 0 230
Large board (2x1 m) with set of castors
Consisting of
2 = 00 0 232 Castors, top, for large board
3 = 00 0 233 Castors, bottom, for large board
00 0 240 Small Moving Special Tool Board Without Films
In conjunction with: Film and hook set
Note: For retrofitting a special tool cabinet from 2 m in length.
SI number: 0 01 02 (810)
Order number: 00 0 240
Small moving special tool board without films
Consisting of
1 = 00 0 241 Small special tool board 0.65 m x 1 m
2 = 00 0 242 Castors, top
Note: For moving a small special tool board
3 = 00 0 243 Castors, bottom
Note: For moving a small special tool board
Scheme 71
00 0 250 Shelf
Note: With mounting material.
SI number: 0 01 00 (549)
Order number: 00 0 250
Shelf
Scheme 72
00 0 260 Drawer Block
Note: With 5 lockable drawers
SI number: 0 01 00 (549)
Order number: 00 0 260
Drawer block
Scheme 73
00 0 270 Rear Panel (2 Pcs.)
Note: For sealing the rear panel (height 2 m x width 1 m) during free erection of a special tool cabinet.
SI number: 0 01 00 (549)
Order number: 00 0 270
Rear panel (2 pcs.)
00 0 280 Film Sheet and Hook Sets From Special Tool Board VII
In conjunction with: 00 0 224 or appropriate number 00 0 241
Note: For retrofitting onto special tool boards. NOTE: Each film with hook set is always supplied in accordance with the current status of the special tools. Up to three films can be stuck onto a large special tool board.
Order number: 00 0 280
Film sheet and hook sets from special tool board VII
Consisting of
1 = 00 0 281 Film sheet and hook set
Note: For fields A/B/C - 41 and 42
2 = 00 0 282 Film sheet and hook set
Note: For fields A/B/C - 43 and 44
Scheme 74
00 0 333 Supplementary Film/Hook Set
Note: For mechanical tools in special tool cabinet - Model series: E39 - engine: M57
Order number: 00 0 333
Supplementary film/hook set
00 0 334 Supplementary Film/Hook Set
Note: For mechanical tools in special tool cabinet - Engine: S62
Order number: 00 0 334
Supplementary film/hook set
00 0 335 Supplementary Film/Hook Set
Note: For mechanical tools in special tool cabinet - Engine: S62 (Part 2)
Order number: 00 0 335
Supplementary film/hook set
00 0 336 Supplementary Film/Hook Set
Note: For mechanical tools in special tool cabinet - Engine: M67
Order number: 00 0 336
Supplementary film/hook set
00 0 337 Supplementary Film/Hook Set
Note: For mechanical tools in special tool cabinet - Transmission: F-transmission
Order number: 00 0 337
Supplementary film/hook set
00 0 338 Supplementary Film/Hook Set
Note: For mechanical tools in special tool cabinet - Model series: E53
Order number: 00 0 338
Supplementary film/hook set
00 0 339 Supplementary Film/Hook Set
Note: For mechanical tools in special tool cabinet - Special tools 24 4 137, 33 3 030, 33 3 040
Order number: 00 0 339
Supplementary film/hook set
00 0 341 Supplementary Film/Hook Set
Note: For mechanical tools in special tool cabinet - Engine: S54
Order number: 00 0 341
Supplementary film/hook set
00 0 342 Supplementary Film and Hook Set
Note: For mechanical tools in special tool cabinet E65/M57TU, M67
Order number: 00 0 342
Supplementary film and hook set
00 0 343 Film and Hook Set
Note: For mechanical tools in special tool cabinet E65, N73
Order number: 00 0 343
Film and hook set
00 0 344 Film and Hook Set
Note: For mechanical tools in special tool cabinet R50, W17
Order number: 00 0 344
Film and hook set
00 0 345 Film and Hook Set
Order number: 00 0 345
Film and hook set
00 0 346 Film and Hook Set
Order number: 00 0 346
Film and hook set
00 0 347 Film and Hook Set
Order number: 00 0 347
Film and hook set
00 0 348 Film and Hook Set
Order number: 00 0 348
Film and hook set
00 0 354 Films/Hook Set E90
Order number: 00 0 354
Films/hook set E90
00 0 355 Films/Hook Set
Note: 61 6 100, 61 6 110
Order number: 00 0 355
Films/hook set
00 0 356 Films/Hook Set
Note: 23 0 320
Order number: 00 0 356
Films/hook set
00 0 357 Films/Hook Set
Note: For 33 4 285
Order number: 00 0 357
Films/hook set
00 0 358 Films/Hook Set
Order number: 00 0 358
Films/hook set
00 0 359 Supplementary Foils + Hooks For 24 2 354 and 24 4 166
Order number: 00 0 359
Supplementary foils + hooks for 24 2 354 & 24 4 166
00 0 361 Supplementary Films/Hooks For N43, N47
Order number: 00 0 361
Supplementary films/hooks for N43, N47
00 0 415 Film Set 1 + 2 For E87
Order number: 00 0 415
Film set 1 + 2 for E87
00 0 416 Film Set Cable Cabinet 1 For E90
Order number: 00 0 416
Film set cable cabinet 1 for E90
00 0 418 Film Set Cable Cabinet 2
Order number: 00 0 418
Film set cable cabinet 2
00 0 450 Cross-Member/Sub-No.
Note: Reserved for consecutive sub-no. crossmember 00 0 200
SI number: 1 10 02 (907)
Order number: 00 0 450
Cross-member / sub-no.
00 1 000 Special Tool Cabinet, Length 6 m, Complete Current Range of Equipment
Note: Range of equipment comprises: - Base frame - Films - Hooks - 5 large special tool boards - 4 small special tool boards Accessories such as storage shelves (00 0 250), drawer blocks (00 0 260) and rear panels (00 0 270) must be ordered separately.
SI number: 1 10 04 (092)
Order number: 00 1 000
Special tool cabinet, length 6 m, complete current range of equipment.
Scheme 75
00 1 010 Special Tool Cabinet, Length 4 m and 2 m, Complete Current Range of Equipment
Note: Consisting of tool cabinet 4 m and 2 m. All boards covered with film, hook set and folding index with list. Accessories such as storage shelves (00 0 250), drawer blocks (00 0 260) and rear panels (00 0 270) must be ordered separately.
Order number: 00 1 010
Special tool cabinet, length 4 m and 2 m, complete current range of equipment.
00 1 140 E87 Film and Hook Set
Note: E87
Order number: 00 1 140
E87 film and hook set
Consisting of
1 = 00 1 141 Film sheet
2 = 00 1 142 Hook set
00 1 150 N 52 Film and Hook Set
Note: N52
Order number: 00 1 150
N 52 film and hook set
Consisting of
1 = 00 1 151 Film sheet
2 = 00 1 152 Hook set
00 1 160 Film and Hook Set For S85
Note: (for action tools)
SI number: 1 12 05 (196)
Order number: 00 1 160
Film and hook set for S85
00 1 161 Film S85
Order number: 00 1 161
Film S85
00 1 162 Hook Set S85
Order number: 00 1 162
Hook set S85
00 1 170 Film and Hook Set For S85
Note: (for store tools)
SI number: 1 12 05 (196)
Order number: 00 1 170
Film and hook set for S85
00 1 171 Film S85
Order number: 00 1 171
Film S85
00 1 172 Hook Set S85
Order number: 00 1 172
Hook set S85
00 1 300 Tool Cabinet, USA Version, Complete
Note: Consisting of: - Tool cabinet 4 m - All boards covered with film, USA version - including hook set - including lighting
Order number: 00 1 300
Tool cabinet, USA version, complete
Consisting of
1 = 00 1 301 2 m tool cabinet USA basic version
Note: Consisting of: - Tool cabinet 2 m - Large bright-finish board - including lighting
2 = 00 1 302 2 m tool cabinet USA add-on version
Note: Consisting of: - Tool cabinet 2 m - Large bright-finish board - including lighting
00 1 310 Tool Boards, Complete, USA Version
Note: Consisting of: - 3 large tool boards, covered with film - including hook set - including wall mounting
Order number: 00 1 310
Tool boards, complete, USA version
00 1 320 Film Set, Complete, USA Version
Order number: 00 1 320
Film set, complete, USA version
Consisting of
1 = 00 1 321 Film no. 1 USA version
2 = 00 1 322 Film no. 2 USA version
3 = 00 1 323 Film no. 3 USA version
4 = 00 1 324 Film no. 4 USA version
5 = 00 1 325 Film no. 5 USA version
6 = 00 1 326 Film no. 6 USA version
7 = 00 1 327 Film no. 7 USA version
8 = 00 1 328 Film no. 8 USA version
9 = 00 1 329 Film no. 9 USA version
00 1 331 Film No. 10 USA Version
Order number: 00 1 331
Film no. 10 USA version
00 1 332 Film No. 11 USA Version
Order number: 00 1 332
Film no. 11 USA version
00 1 333 Film No. 12 USA Version
Order number: 00 1 333
Film no. 12 USA version
00 1 340 Hook Set, Complete, For 00 1 300, USA Version
Order number: 00 1 340
Hook set, complete, for 00 1 300, USA version
Consisting of
1 = 00 1 341 Hook set for film no. 1 USA-Version
2 = 00 1 342 Hook set for film no. 2 USA version
3 = 00 1 343 Hook set for film no. 3 USA version
4 = 00 1 344 Hook set for film no. 4 USA version
5 = 00 1 345 Hook set for film no. 5 USA version
6 = 00 1 346 Hook set for film no. 6 USA version
7 = 00 1 347 Hook set for film no. 7 USA version
8 = 00 1 348 Hook set for film no. 8 USA version
9 = 00 1 349 Hook set for film no. 9 USA version
00 1 351 Hook Set For Film No. 10 USA Version
Order number: 00 1 351
Hook set for film no. 10 USA version
00 1 352 Hook Set For Film No. 11 USA Version
Order number: 00 1 352
Hook set for film no. 11 USA version
00 2 030 Universal Hydro-Lifter Basic Unit
In conjunction with: 00 2 040, 23 0 040, 23 0 130, 24 0 170, 24 5 300, 25 5 350, 27 1 030, 33 4 420, 51 3 280
Note: Chassis and hydraulic jack - For removing and installing rear axle carriers and transmissions Also for convertible top take-up supports E85 and E64.
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R56, RR1, RR2
SI number: 1 05 90 (207)
Order number: 00 2 030
Universal hydro-lifter basic unit
Consisting of
1 = 00 2 031 Adapter for transmission brackets
Note: Model series: E30, E31, E32, E34, E36
In conjunction with: 23 0 000, 24 0 130
Scheme 76
00 2 040 Basic Take-Up Fixture
In conjunction with: 00 2 030, 33 3 270, 33 3 290, 33 3 300, 33 4 220, 33 4 230
Note: For removing and installing rear axle carriers, without pillar guide and lift hoist.
Series: E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E87, E90, E91, E92, E93, R56, RR1, RR2
Storage location: Single
SI number: 1 05 90 (207)
Order number: 00 2 040
Basic take-up fixture
Consisting of
1 = 00 2 041 Base frame
2 = 00 2 042 Take-up fixtures, side
Scheme 77
00 2 050 Torque Wrench, Adjustable From 1 To 36 Nm
Note: For tightening ZF selector units and for adjusting brake bands BW65
Transmission: BW 65
Order number: 00 2 050
Torque wrench, adjustable from 1 to 36 Nm
Consisting of
1 = 00 2 051 Torque wrench without socket ratchet
2 = 00 2 052 Socket ratchet
Scheme 78
00 2 080 Hand Pump
Note: For Lifetime oil filling
SI number: 1 01 98 (294)
Order number: 00 2 080
Hand pump
Scheme 79
00 2 210 Exhaust Pipe Cutter
Note: For V2a pipe
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R56, RR1
Storage location: A9, B9
SI number: 1 03 95 (900)
Order number: 00 2 210
Exhaust pipe cutter
Consisting of
2 = 00 2 212 Chain
Scheme 80
00 2 240 Blind Riveting Tongs
Note: Blind riveting tongs for plastic rivets
Series: E46/2, E46/5, E46/C, E53, E70
Storage location: C37
SI number: 1 12 03 (997)
Order number: 00 2 240
Blind riveting tongs
Consisting of
1 = 00 2 241 Tool
2 = 00 2 242 Adapter
Scheme 81
00 2 250 Special Pliers For Cable Reconditioning
Note: With the market introduction of engines (N46, N52 and S85), cable 12 7 420/421 can be used for diagnosis after conditioning
SI number: 02 03 04 (106)
Order number: 00 2 250
Special pliers for cable reconditioning
Scheme 82
00 2 260 Locating Fixture
Minimum set: Mechanical tools
Note: For securing vehicle on lifting platform.
Series: E70
SI number: 01 22 06 (307)
Order number: 00 2 260
Locating fixture
Scheme 83
00 2 261 Adapter (2x)
SI number: 01 22 06 (307)
Order number: 00 2 261
Adapter (2 x)
00 2 262 Tensioning Strap (2x)
SI number: 01 22 06 (307)
Order number: 00 2 262
Tensioning strap (2 x)
00 2 300 Assembly Stand With Universal Flange
Note: For accommodating engines from S85
Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45, N46, N51, N52, N53, N54, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, S85, W10, W11, W17
SI number: 01 25 04 (155)
Order number: 00 2 300
Assembly stand with universal flange
Consisting of
1 = 00 2 301 Assembly stand
2 = 00 2 302 Universal flange
3 = 00 2 303 Crank
4 = 00 2 304 Protection hood
5 = 00 2 305 Storage for small parts
6 = 00 2 306 Molded tray, rear
7 = 00 2 307 Oil drip tray
8 = 00 2 308 Molded tray, front
9 = 00 2 309 Wheel, front (without stop)
10 = 00 2 311 Wheel, rear (with stop)
11 = 00 2 312 Set of rippled mats
Scheme 84
00 2 320 Support Arm With Mounting Plate
In conjunction with: 00 2 300
Note: For accommodating older 8 and 12-cylinder engines
Engine: M67, M67TU, N62, N62TU, N73, S85
SI number: 01 25 04 (155)
Order number: 00 2 320
Support arm with mounting plate
Consisting of
1 = 00 2 321 Support arm
2 = 00 2 322 Mounting plate
Scheme 85
00 2 480 Measurement Stand With Clamp
Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45, N46, N52, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, W10, W11, W17
SI number: 1 18 99 (489)
Order number: 00 2 480
Measurement stand with clamp
Consisting of
1 = 00 2 481 Clamping foot
2 = 00 2 482 Clamping piece
3 = 00 2 483 Shaft
4 = 00 2 484 Shaft
Scheme 86
00 2 510 Dial Gauge With Feeler
In conjunction with: 00 2 500
Note: Dial can be turned at outer ring to needle zero position
Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45, N46, N52, N53, N54, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, S85, W10, W11, W17
Storage location: A13
Order number: 00 2 510
Dial gauge with feeler
Scheme 87
00 2 520 Torx Sockets E10, E12, E14
Note: Replaced by Torx tool kit (see Workshop Equipment and Planning Documentation Group 9)
Order number: 00 2 520
Torx sockets E10, E12, E14
Consisting of
1 = 00 2 521 Torx socket E10
2 = 00 2 522 Torx socket E12
3 = 00 2 523 Torx socket E14
00 2 550 Depth Gauge
Note: E.g. for determining axial play of transmission shaft and basic adjustment dimension for installing bevel pinion in rear differentials
Transmission: 240/5, 242/4, 245/5, 245/5Sport, 260/5, 262/4, 265/5, 265/5Sport, 280/5Sport, A4S 200R, A5S 360R, A5S 390R, GS5-39DZ, diff. 188kom, diff. 220kom, diff. 225kom, diff. type G, diff. type K, diff. type M, S5D 200G, S5D 250G, S5D 260Z, S5D 280Z, S5D 310Z, S5D 320Z, S5D 390Z, S6S 420G, S6S 560G
Storage location: A12, B12
Order number: 00 2 550
Depth gauge
Scheme 88
00 4 420 Charger
Note: Charger for storage batteries in 00 4 400 and 00 4 410. > Input voltage 230 V / 50 Hz > Output voltage 1.65 V > Charge current miniature 4x400 mA > Charge current micro 4x300 mA
SI number: 1 01 05 (172)
Order number: 00 4 420
Charger
Scheme 89
00 5 010 Universal Puller
Minimum set: Mechanical tools
Note: For withdrawing radial seals 00 5 011 for E90
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, RR1, RR2
Storage location: B26
Order number: 00 5 010
Universal puller
Consisting of
1 = 00 5 011 Extractor claw (3 pieces required)
2 = 00 5 012 Guide spindle
3 = 00 5 013 Pressure spindle
4 = 00 5 014 Take-up star
Note: For taking up extractor claw
5 = 00 5 015 Thrust member
Scheme 90
00 5 030 Special Pliers For Seat Belt Limiter
Note: Replaced by 00 5 040
Order number: 00 5 030
Special pliers for seat belt limiter
Scheme 91
00 5 040 Riveting Tool
Note: For riveting seat belt limiter
Storage location: C10
SI number: 1 05 95 (932)
Order number: 00 5 040
Riveting tool
Scheme 92
00 5 101 Film 1, Board I
SI number: 1 19 06 298
Order number: 00 5 101
Film 1, board I
00 5 102 Film 2, Board I
SI number: 1 19 06 298
Order number: 00 5 102
Film 2, board I
00 5 103 Film 3, Board I
SI number: 1 19 06 298
Order number: 00 5 103
Film 3, board I
00 5 104 Film 4, Board II
SI number: 1 19 06 298
Order number: 00 5 104
Film 4, board II
00 5 105 Film 5, Board II
SI number: 1 19 06 298
Order number: 00 5 105
Film 5, board II
00 5 106 Film 6, Board II
SI number: 1 19 06 298
Order number: 00 5 106
Film 6, board II
00 5 107 Film 7, Board II
SI number: 1 19 06 298
Order number: 00 5 107
Film 7, board II
00 5 108 Film 8, Board II
SI number: 1 19 06 298
Order number: 00 5 108
Film 8, board II
00 5 109 Film 9, Board 3
SI number: 1 19 06 298
Order number: 00 5 109
Film 9, board 3
00 5 111 Film 10 (A/B/C 19/20)
Note: Engine: N54
Order number: 00 5 111
Film 10 (A/B/C 19/20)
00 5 112 Film 11 (A/B/C 21/22)
Note: Model series: E70
Order number: 00 5 112
Film 11 (A/B/C 21/22)
00 5 113 Film 12 (A/B/C 23/24)
Note: GM6 and RHT
Order number: 00 5 113
Film 12 (A/B/C 23/24)
00 5 211 Hook Set For film 10
Note: Engine: N54
Order number: 00 5 211
Hook set for film 10
00 5 212 Hook Set
Note: Hook set for film 11
Order number: 00 5 212
Hook set
00 5 213 Hook Set
Note: Hook set for film 12
Order number: 00 5 213
Hook set
00 5 301 Film
Note: R56 "N12" N14
Order number: 00 5 301
Film
00 5 302 Film
Note: R56/W16
Order number: 00 5 302
Film
00 5 351 Hook Set
Note: R56 "N12" N14
Order number: 00 5 351
Hook set
00 5 352 Hook Set
Note: R56/W16
Order number: 00 5 352
Hook set
00 5 499 Supplementary Hook Set
Note: for film 1-9
SI number: 1 19 06 298
Order number: 00 5 499
Supplementary hook set
00 5 500 Handle For Drifts
Minimum set: Mechanical tools
In conjunction with: 11 2 030
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R56, RR1, RR2
Storage location: B31
Order number: 00 5 500
Handle for drifts
Scheme 93
00 7 500 Universal Puller Kukko 17/K
Note: For removing bearing inner race from drive flange at rear wheel bearing
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R56, RR1
Order number: 00 7 500
Universal puller Kukko 17/K
Consisting of
1 = 00 7 501 Pressure spindle with bridge
2 = 00 7 502 Adjusting spindle (2 x) with knurled nuts (4 x)
3 = 00 7 503 Pressure spindle, side
4 = 00 7 504 Adjusting jaws (2 x)
5 = 00 7 505 Adjusting screws (2 x) with nuts
Note: For adjusting jaw (2 x)
6 = 00 7 506 Extension (2 x)
7 = 00 7 507 Bridge
Scheme 94
00 8 600 Hook Set
Note: For reorganization and mounting of existing special tools on tool boards - NOTE: The following individual tools cannot be ordered in the set!
Series: All models
Order number: 00 8 600
Hook set
Consisting of
1 = 00 8 601 Hook No. 1
10 = 00 8 612 Hook No. 12
11 = 00 8 613 Hook No. 13
12 = 00 8 614 Hook No. 14
13 = 00 8 615 Hook No. 15
14 = 00 8 616 Hook No. 16
15 = 00 8 617 Hook No. 17
16 = 00 8 620 Hook No. 20
17 = 00 8 621 Hook No. 21
18 = 00 8 622 Hook No. 22
19 = 00 8 625 Hook No. 25
2 = 00 8 602 Hook No. 2
20 = 00 8 626 Hook No. 26
21 = 00 8 628 Hook No. 28
22 = 00 8 629 Hook No. 29
23 = 00 8 630 Hook No. 30
3 = 00 8 603 Hook No. 3
4 = 00 8 604 Hook No. 4
5 = 00 8 606 Hook No. 6
6 = 00 8 608 Hook No. 8
7 = 00 8 609 Hook No. 9
8 = 00 8 610 Hook No. 10
9 = 00 8 611 Hook No. 11
00 8 660 Magnet
Storage location: Tool cabinet
Order number: 00 8 660
Magnet
Scheme 95
00 8 690 Washers and Screws
Order number: 00 8 690
Washers and screws
Consisting of
1 = 00 8 691 Washers, 100 x
2 = 00 8 692 Screws, 100 x
3 = 00 8 693 Screws, 100 x
Note: For USA
4 = 00 8 694 Box 40 mm
5 = 00 8 695 Box 100 mm
6 = 00 8 696 Box 150 mm
00 9 110 Circlip Pliers
Note: External circlip - With long legs, 90° angle
Series: All models
Order number: 00 9 110
Circlip pliers
Scheme 96
00 9 120 Torque Angle Measuring Dial
Minimum set: Mechanical tools
Note: For torsion angle tightening of cylinder head bolts (all engines) And reinforcement plate front axle carrier E46
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R56, RR1, RR2
Storage location: A12
Order number: 00 9 120
Torque angle measuring dial
Scheme 97
00 9 130 Magnet With 1/2" Connection
Minimum set: Mechanical tools
In conjunction with: 00 9 120
Note: For securing angle-of-rotation disk 00 9 120 to body.
Series: E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92
SI number: 1 17 04 (130)
Order number: 00 9 130
Magnet with 1/2" connection
Scheme 98
00 9 290 Riveting Tool
Note: Is replaced by 00 2 240!
Series: All models
Order number: 00 9 290
Riveting tool
00 9 310 Assembly Wedges (set in plastic case)
Minimum set: Mechanical tools
Note: For straightening and assembly jobs on vehicle bodies, e.g. fitting trim panels, removing window weatherstrips, repairing small-scale dents, removing residual adhesive materials, measuring gap widths, levering out trim panel parts
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R55, R56, RR1, RR2
SI number: 1 25 05 230
Order number: 00 9 310
Assembly wedges (set in plastic case)
Consisting of
1 = 00 9 311 Trim remover
2 = 00 9 312 Striking wedge, square
3 = 00 9 313 Striking wedge, large
4 = 00 9 314 Adjusting wedges (2 x)
5 = 00 9 315 Gap wedge
6 = 00 9 316 Sealing lip wedge
7 = 00 9 317 Trim panel wedge
8 = 00 9 318 Universal wedge
9 = 00 9 319 Striking wedge, small
10 = 00 9 321 Fishbone
11 = 00 9 322 Plastic wedge
12 = 00 9 323 Cleaning wedge (scraper)
13 = 00 9 324 Trim remover (metal plate)
Note: For removing stem trims from E60
14 = 00 9 329 Case with inlay for assembly wedges
In conjunction with: 009310
Scheme 99
00 9 340 Disassembly Aid (2)
Minimum set: Mechanical tools
Note: For levering out switch block on driver's door.
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R55, R56, RR1, RR2
SI number: 1 15 99 (483)
Order number: 00 9 340
Disassembly aid (2)
Scheme 100
00 9 450 Torque Wrench
Note: Infinitely adjustable from 0.05 Nm to 0.6 Nm (5 cNm to 60 cNm). 1/4" external square bit connection. For information on adjustment, see SWZ Service Information 1 03 07 337 Annex 3.
Series: E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R56, RR1, RR2
SI number: 1 03 07 337
Order number: 00 9 450
Torque wrench
Scheme 101
See also:
• 00 8 600 HOOK SET