Special tools required
- 11 2 170
(clutch removed)
Lock flywheel with special tool 11 2 170.
Scheme 159
Unfasten screws and remove flywheel.
Scheme 160
Installation
Check dowel sleeve for damage and correct installation position.
Scheme 161
Installation
Position of dowel sleeve (1) in dual-mass flywheel is identified by two notches next to associated bolt hole.
Scheme 162
Installation
Clean thread and install new micro-encapsulated screws.
Scheme 163
Tightening torque 11 22 1AZ. Refer to ENGINE - TIGHTENING TORQUES .