Configuration
Configuration provides information for the device selected pertaining to
Scheme 103
- Interface Name
- Gateway
- IP Address
- IP Subnet Mask
The specific name assigned to the device (Ex. Blue A). The name used should be helpful in locating/identifying the particular interface if necessary.
A specific four segment number assigned exclusively to the device. The number represents the address of the device on the network and is necessary when communicating with other devices located on the network.
This information identifies the four segment address of the component located on the network responsible for communicating from the current network to another network. If the there is no address in this location then a connection to any devices outside of the current network can not be established.
This information is used to define which segment of the four segment IP address specifically identifies the device and which identify the specific network.
Example: 255.255.255.0
Indicates that the first three segments (255.255.255) identify the specific network that the device is located on. The last segment (0) indicates that this is the segment that will identify the specific device.
Note. The network and device address information must be entered exactly as defined by the network administrator for your facility, otherwise the devices can not be accessed.
After entering the necessary information and continue is selected, Progman will run a check on the values/information entered and will indicate if the information is acceptable.
