31 00 Front axle - ride height E63 / E64
| Ride level height in normal position Attach tape measure to bottom middle of rim flange and measure to lower edge of wheel arch | ||
|---|---|---|
| Tolerance ride height in normal position max. 10 mm Design position max. 2 mm | ||
| Difference ride height between left/right in normal position 10 mm design position 2 mm | ||
| Series | ||
| 17" rim | Mm | 627 |
| 18" rim | Mm | 640 |
| 19" rim | Mm | 652 |
| 20" rim | Mm | 665 |
TECHNICAL DATA - FRONT AXLE - RIDE HEIGHT E63 / E64
| Ride level height in normal position Attach tape measure to bottom middle of rim flange and measure to lower edge of wheel arch | ||
|---|---|---|
| Tolerance ride height in normal position max. 10 mm Design position max. 1 mm | ||
| Difference ride height between left/right in normal position 10 mm design position 1 mm | ||
| Series | ||
| 18" rim | Mm | 639 |
| 19" rim | Mm | 651 |
TECHNICAL DATA - FRONT AXLE - RIDE HEIGHT M6
31 00 General - Track Width / Wheelbase E63 / E64 Standard suspension
| Track width for normal position and offset (ET) | ||
|---|---|---|
| ET 14 | Mm | 1558 |
| ET 12 | Mm | 1767 |
| Wheelbase | Mm | 2780 |
TECHNICAL DATA - GENERAL - TRACK WIDTH / WHEELBASE E63 / E64 /M6 STANDARD SUSPENSION
| Ride level height in normal position Attach tape measure to bottom middle of rim flange and measure to lower edge of wheel arch | ||
|---|---|---|
| Tolerance ride height in normal position max. 10 mm Design position max. 2 mm | ||
| Difference ride height between left/right in normal position 10 mm design position 2 mm | ||
| Series | ||
| 16" rim | Mm | |
| 17" rim | Mm | 627 |
| 18" rim | Mm | 640 |
| 19" rim | Mm | 652 |
| 20" rim | Mm | 665 |
| Low-slung sport suspension | ||
| 16" rim | Mm | |
| 17" rim | Mm | |
| 18" rim | Mm | |
| 19" rim | Mm | |
| 20" rim | Mm | |
| ROUGH ROAD PACKAGE (SA 815) | ||
| 16" rim | Mm | |
| 17" rim | Mm | |
| 18" rim | Mm | |
| 19" rim | Mm | |
| 20" rim | Mm | |
TECHNICAL DATA - FRONT AXLE - RIDE HEIGHT E63 / E64
31 21 Wheel Bearings and Steering Knuckle
| Bearing units lubricated for entire service life and cannot be disassembled | ||
|---|---|---|
| Max. axial runout of wheel hub at wheel bearing flange | Max. mm | < 0.03 |
TECHNICAL DATA - WHEEL BEARINGS AND STEERING KNUCKLE