13 71 Air intake silencer
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Gaiter to intake muffler | S85 | Hose clamp | 3 Nm | |
| 2AZ Intake manifold to throttle-valve assembly | S85 | Hose clamp | 1 Nm | |
| 3AZ Intake muffler to rubber mount | S85 | M6 to cylindrical bearing | 8 Nm |
13 71 Air intake silencer
13 64 Fuel Injectors
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Fuel injector to intake manifold | All | M6 | 10 Nm |
13 64 Fuel Injectors
13 31 Fuel Pump with Drive and Pipes
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Fuel pump to engine | All | 12 Nm |
13 31 Fuel Pump with Drive and Pipes
13 62 Senders for Control Unit
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Exhaust-gas temperature sensor | S85 | M14x1.5 | 25 ± 5 Nm | |
| 2AZ Lambda oxygen sensor | S85 | M14x1.5 | 50 Nm | |
| 3AZ Coolant temperature sensor | S85 | M14x1.5 | 14 Nm |
13 62 Senders for Control Unit
13 41 Throttle and actuator
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Idle-speed actuator to cylinder head | S85 | M6 | 8 Nm | |
| 2AZ Idle-speed actuator hose to idle-speed actuator | S85 | Hose clamp | 2 Nm | |
| 3AZ Screw connection, actuating lever | S85 | M5 | 7 Nm |
13 41 Throttle and actuator
13 54 Throttle and actuator
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Actuating lever to actuating shaft | S85 | M5 | Use screws and nuts only once | 7 Nm |
| 2AZ Cover for actuator to throttle valve assy.-cyl. 10 | S85 | M6x18 microencapsulated | Use screws only once | 8 Nm |
| 3AZ Stop ring to end of actuating shaft | S85 | M5 | Use Loctite 243 adhesive | 6 Nm |
13 54 Throttle and actuator