Device Minimum set: Mechanical tools MW BMW M3 E90

Device Minimum set: Mechanical tools MW

Note. (Extraction and pulling device) For removing and installing output shaft in drive flange as well as for removing front wheel bearing unit. Replaced by 33 2 200.(0 496 062)

C13

C38

C14

Scheme 358

Consisting of

1 = 0492170 Spindle

Note. (Pressure spindle) For pressing out. Series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E67, E83, E85 Replaced by 33 2 203.(0 496 066)

1 = 0492171 Bridge

Note. Replaced by 33 2 116.(0 492 175)

1 = 0492172 Shaped part

Note. (Shaped part) Model series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E85, RR1 Replaced by 33 2 117.(0 492 176)

7 = 0492176 Shaped part

Note. (Shaped part) Model series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E67, E83, E85 Replaced by 33 2 207/0 496 070

8 = 0492177 Spindle

Note. (Spindle for installation) Model series: E31, E52, E53, E60, E61, E65, E66, E67, E83 Replaced by 33 2 205.(0 496 068)

9 = 0492178 Spindle

Note. For installing/model series: E36, E46 Replaced by 33 2 206.(0 496 069)

4 = 0492173 Spindle

Note. For installing/model series: E30 Replaced by 33 2 204/0 496 067

5 = 0492174 Nut

Note. (Nut with bearing) Series: E30, E31, E32, E36, E38, E39, E46, E52, E53, E60, E61, E65, E66, E67, E83, E85, RR1 Replaced by 33 2 208/0 496 071

6 = 0492175 Bridge

Note. New version 09/98 Model series: E30, E31, E32, E36, E38, E39, E46, E52, E53, E60, E61, E65, E66, E67, E83, E85, E90, RR1 Replaced by 332 201/0 496 063

Note. (Device) For installing split rubber mounts.

A50

B50

Scheme 359

01 15 04 (117)

Consisting of

1 = 0495038 Spindle

Note. (Spindle with handle)

2 = 0495039 Screw

Note. (Knurled screws (2 x))

3 = 0495040 Fixture

Note. (Fixture for diameter 46 mm)

4 = 0495041 Tensioning strap

Note. (Tensioning strap)

5 = 0495042 Fixture

Note. (Fixture for diameter 51 mm)

6 = 0495043 Tensioning strap

Note. (Tensioning strap)

Note. For extracting and press-fitting the rubber mount in the trailing arm.

01 01 89 (989)

Consisting of

1 = 0492379 Sleeve

Note. (support sleeve) During extraction

2 = 0492380 Sleeve

Note. (press-out sleeve)

3 = 0492381 Sleeve

Note. (press-in sleeve)

4 = 0492382 Shaped element

Note. For press-fitting

Scheme 360

Note. For removing and installing the rubber mount in the wishbone

01 01 89 (989)

Consisting of

1 = 0492384 Sleeve

Note. (Support sleeve) For pressing out

2 = 0492385 Sleeve

Note. (Press-out sleeve)

Scheme 361

3 = 0492386 Sleeve

Note. (Press-in sleeve)

4 = 0492387 Shaped element

Note. For pressing in